Lg 50pc55 - 3 faint lines - duff panel or not?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • leo-saphira
    Member
    • Feb 2015
    • 32
    • UK
    #1

    Lg 50pc55 - 3 faint lines - duff panel or not?

    Quick question - I have one of these LG 50PC55

    there is 3 faint lines on the right hand side of the panel that shows in the lighter scences as per the attached photos - is it the panel itself failing or not?

    Thanks
    Attached Files
    Last edited by leo-saphira; 06-20-2015, 03:49 PM. Reason: Update
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Lg 50pc55 - 3 faint lines - duff panel or not?

      Unfortunately that is a bad panel
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • leo-saphira
          Member
          • Feb 2015
          • 32
          • UK
          #3
          Re: Lg 50pc55 - 3 faint lines - duff panel or not?

          thanks tom i will strip it for use in another set

            Comment

            Previous template Next

            Related Topics

            Collapse
            • learnmore
              Samsung UE70TU7020K Which lines to tape on a bad panel
              by learnmore
              Hello Community,

              I'm working on a Samsung UE70TU7020K.

              It looks like a bad panel. There is only 1 FPC cable from the Tcon (built into mainboard) to the panel.

              I'm using a piece of tap a few mils (covers about 8-10 pins), at different locations and have had varying results but nothing that is remotely watchable (multiple lines across all the screen, half screen and total black out on screen). The buffer board is divided into 3 boards. I've disconnected the end board one at a time but each time the screen was totally black. I presume it's because the potential...
              03-15-2024, 03:01 PM
            • Anonmis
              Samsung 55" UN55JS9000 - Pink vertical lines due to chipped LCD panel?
              by Anonmis
              Hello all, I was recently repairing my Samsung 55" UN55JS9000 tv from the common burnt backlight LED's and cracked light guide panel issue. After replacing the LED's and putting the TV back together, I tested the tv and all I was getting was sound but no image. Somewhere along the way (could be related to the next issue) the T-Con board became damaged and after replacing it I have made a little bit of progress but now have bright pink vertical lines and still no image.

              The bigger issue .... I took the TV apart again and realized that I likely didn't sit the LCD panel correctly...
              12-01-2023, 04:31 PM
            • Raulnn
              Xiaomi L55M5-5ASP fine lines on the panel uniform
              by Raulnn
              Good afternoon! Does anyone know how to remove these lines? They are very fine lines at the bottom of the panel. I have 2 identical panels, and I have even thought that this brand has this lattice format, although I highly doubt it.

              The photo from the YouTube app is where it is best seen.

              thanks in advance....
              01-28-2024, 10:30 AM
            • howardc64
              LG 49UJ6500 LCD panel lighter band that goes away
              by howardc64
              49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

              Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
              02-19-2023, 12:13 AM
            • maneatingmonkey
              Missing LCD Panel Voltages VGH, VGL, VCOM (TCL 55P6US Sound & Backlight but NO Picture)
              by maneatingmonkey
              I have a TCL 55P6US with sound and backlight but no picture. This model does not have a T-CON board, and the right (rear perspective) panel board is fed from the left panel board. I have not been able to induce any change by disconnecting the secondary panel board or the tape cut-off method on the primary board.

              There are a bunch of voltages missing on the panel boards. I can't find any shorted caps of the panel boards, and all of the missing voltage rails read in the kiloohms, which leads me to suspect the issue may lie on the circuit board, rather than a short in the panel.
              ...
              L Panel #1
              11 Photos
              03-27-2024, 07:17 AM
            • Loading...
            • No more items.
            Working...