Philips 42pfl7422d/37 no backlight

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mattstolte
    Badcaps Veteran
    • Dec 2013
    • 612
    • usa
    #1

    Philips 42pfl7422d/37 no backlight

    Tv turns on but no backlight. I see image so i thought it was inverters, i tried replacing them and still didnt work, and i know they are good cause tried them in another set. Then tried power supply still no back light?
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • Agent24
      I see dead caps
      • Oct 2007
      • 5086
      • New Zealand
      #2
      Re: Philips 42pfl7422d/37 no backlight

      Are the inverters getting power and a control signal to tell them to power up?
      "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
      -David VanHorn

        Comment

        • mattstolte
          Badcaps Veteran
          • Dec 2013
          • 612
          • usa
          #3
          Re: Philips 42pfl7422d/37 no backlight

          Anybody have a power supply schematic for this power supply so i can find measure ments

            Comment

            • Agent24
              I see dead caps
              • Oct 2007
              • 5086
              • New Zealand
              #4
              Re: Philips 42pfl7422d/37 no backlight

              Look next to the connectors, most have names next to each wire so you know what they do. Most are self-explanatory. Post photos if you can.
              "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
              -David VanHorn

                Comment

                • mattstolte
                  Badcaps Veteran
                  • Dec 2013
                  • 612
                  • usa
                  #5
                  Re: Philips 42pfl7422d/37 no backlight

                  This power supply dont

                    Comment

                    • Agent24
                      I see dead caps
                      • Oct 2007
                      • 5086
                      • New Zealand
                      #6
                      Re: Philips 42pfl7422d/37 no backlight

                      What about on the inverters?
                      "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
                      -David VanHorn

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • chestercc
                          Philips TV Backlight Repair
                          by chestercc
                          So i'm trying to replace the LED's in a Philips TV. It's 42" with a 715g7262-p01-000-0010 backlight driver board based around an O2 Micro OZ9902CGN.

                          My issue is when I replace all the LED's on one board with the new 3V 300ma ones they immediately burn out when the set is powered again. I previously tried the same thing with 6V LED's and the backlight flickered for a bit but wouldn't start.

                          The original LED's which I removed which are still working start to melt and burn when given more than 3V on DCPS so I know they shouldn't be higher voltage ones.

                          ...
                          11-18-2022, 01:15 PM
                        • ohren
                          Trying to control Philips backlight manually with PWM — brightness increases with frequency...?
                          by ohren
                          I raised the question of whether PWM on the power board "dim" pin would be a reasonable assumption for controlling the backlight of a Philips TV (55put6101/12): https://www.badcaps.net/forum/troubl...d-tv-backlight. I didn't receive any insights there so I went ahead and tried it.

                          The setup is basically:

                          Rpi3 hardware PWM → 220 Ohm → NPN transistor → dim pin

                          Transistor is switching the 3.5 V supply on the power board....
                          12-05-2024, 11:10 AM
                        • Document Archive
                          Design of CCFL Backlight Inverters with Frame & Bar Cores
                          by Document Archive
                          Design of CCFL Backlight Inverters with Frame & Bar Cores

                          Summary

                          Portable devices, such as notebook computers and personal digital assistants are developed rapidly nowadays, which places an increasing demand on display technology. The LCD with cold cathode fluorescent back lighting satisfies the requirements on display performance, size and efficiency.

                          The backlight inverter plays a crucial role in supplying the power to the lamps of these flat-panel displays.

                          The frame and bar ferrite cores, described in this brochure, are especially designed...
                          10-07-2024, 04:26 AM
                        • Patrick501
                          Philips 55PUS6704 no picture, backlight ok
                          by Patrick501
                          Hello,
                          I'd like to repair a Philips 55PUS6704.
                          It turns on and you can see the backlight, hear the sound but no picture.

                          When I disconnect one of the T-con cables, half of the screen turns white.
                          right cable disconnected= right side white
                          left cable disconnected= left side white

                          When I tape like 6 or 7 pins of one cable it looks like the picture attached. I already tried another T-con board without success.
                          There are no shorts on the the mainbaord and the two lcd panel boards...at leat I couldn't find any.
                          Also you can notice one single...
                          11-12-2025, 08:46 AM
                        • ovrax
                          Philips 55PUS6804/12 turn on & off (probably backlight issue)
                          by ovrax
                          Hello everyone,

                          First of all, please excuse me as I'm quite new to this field.

                          I have a Philips 55PUS6804/12 TV. It turns on and off instantly (backlight flash). I personally think it's a backlight issue (faulty LEDs). Could you help me confirm my diagnosis?

                          I've checked and the T-CON seems to be fine. I disconnected one ribbon cable at a time at the bottom, but the problem persists.
                          The Ambilight works perfectly and stays on.

                          No sounds.

                          Thanks in advance.
                          5 Photos
                          08-25-2024, 04:33 AM
                        • Loading...
                        • No more items.
                        Working...