LOGIK L32DIGB20 fault.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mr_spark
    New Member
    • Apr 2015
    • 5
    • England

    #1

    LOGIK L32DIGB20 fault.

    Hi;

    I am looking for info on how to repair our L32DIGB20 TV

    It sometimes switches on to a good screen but then white lines and a black screen ( although a blue light remains indicating it is switched on despite the black screen ); from here the TV takes no input from the remote.

    I have read around the mass of info in this forums labyrinth of knowledge and I think it's possibly a PSU fault and a capacitor within it is either open or short circuit ?

    Any help on which component to check/replace would be much appreciated.

    Thanks

    Mr_Spark
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30919
    • Albion

    #2
    Re: LOGIK L32DIGB20 fault.

    pictures

    Comment

    • mr_spark
      New Member
      • Apr 2015
      • 5
      • England

      #3
      Re: LOGIK L32DIGB20 fault.

      Pictures as requested :--

      Thanks

      Spark
      Attached Files
      Last edited by mr_spark; 04-08-2015, 12:25 PM.

      Comment

      • newtothis
        Badcaps Legend
        • Mar 2013
        • 1556
        • england

        #4
        Re: LOGIK L32DIGB20 fault.

        you need to attach them

        Comment

        • mr_spark
          New Member
          • Apr 2015
          • 5
          • England

          #5
          Had to adjust the size :-)

          Another :-
          Attached Files
          Last edited by tom66; 04-09-2015, 11:54 AM.

          Comment

          • newtothis
            Badcaps Legend
            • Mar 2013
            • 1556
            • england

            #6
            Re: LOGIK L32DIGB20 fault.

            We need better quality and lighting

            Comment

            • mr_spark
              New Member
              • Apr 2015
              • 5
              • England

              #7
              Ok - hope these are better :-)

              Photo

              Photo 2

              Photo 3

              Photo 4

              Photo 5

              Photo 6
              Attached Files
              Last edited by tom66; 04-09-2015, 11:54 AM.

              Comment

              Related Topics

              Collapse

              • Ryan.man
                Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                by Ryan.man
                Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                02-04-2025, 12:23 PM
              • smic717394
                iphone XS turns off when press on screen.
                by smic717394
                Hi,

                I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                07-25-2024, 10:16 AM
              • MarkC1970
                Red patches on screen. Driver fault???
                by MarkC1970
                I have a strange fault that I need help understanding. The TV is run with a PCB labelled TP.MS6486.PB711.

                As you will see in the pictures there is a red patch over the right hand side of the screen that is far more visible on a black background but never goes away. It appears like it is some sort of driver fault but I don't know enough about how these panels are driven to even guess where to start looking. Any advice would be greatly appreciated. Thanks.
                11-25-2023, 09:12 PM
              • Chrissygizmo
                Samsung UE55JU6800K half screen dark
                by Chrissygizmo
                Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                02-10-2025, 12:33 AM
              • spice_disc
                Vizio TV M50-C1 reboot cycle and static on screen
                by spice_disc
                I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                09-08-2024, 02:37 PM
              • Loading...
              • No more items.
              Working...