RCA RLC 4062A screen problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • site-web
    New Member
    • Apr 2015
    • 3
    • canada
    #1

    RCA RLC 4062A screen problem

    hello all,

    upper half screen is good
    bottom half screen is bad
    part upside of inverter make a noise bizzzzzz and the part at bottom dont make...

    look at my video. https://youtu.be/Bm3JFrs_Cc4

    thank you
    Tags: None
    • Agent24
      I see dead caps
      • Oct 2007
      • 4913
      • New Zealand
      #2
      Re: RCA RLC 4062A screen problem

      Something wrong with panel, TCON, or main board.
      "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
      -David VanHorn

        Comment

        • site-web
          New Member
          • Apr 2015
          • 3
          • canada
          #3
          Re: RCA RLC 4062A screen problem

          ok thank you

            Comment

            • Agent24
              I see dead caps
              • Oct 2007
              • 4913
              • New Zealand
              #4
              Re: RCA RLC 4062A screen problem

              If you can upload photos of your boards we may be able to spot damaged components and get a better idea of where the fault lies.
              "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
              -David VanHorn

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Chrissygizmo
                  Samsung UE55JU6800K half screen dark
                  by Chrissygizmo
                  Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                  I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                  02-10-2025, 12:33 AM
                • mmccomputer
                  problem with replacing lcd screen
                  by mmccomputer
                  I have an HP model : 14-cf0011nf and I want to change its display screen (it has an original 14" full HD TN 30 pins panel) which works without problem but I want to put another screen with an IPS panel, the problem is that I tried several screens but there is no display except with the original screen, I never had this problem before I changed hundreds without problems but this PC is not 'accepted than its original screen
                  otherwise on the motherboard it displays edp and I don't know, do the panels I tried only work with the LVDS protocol?
                  If anyone has any information on the subject...
                  12-15-2024, 03:44 PM
                • jimjoe123
                  LCD TV Green/Pink screen problem
                  by jimjoe123
                  I have a Dick Smith 37" LCD TV, Model GE6804. I am using it as PC extended monitor only.

                  Problem is while watching tv, I hear a semi loud click(like a electrical breaker tripping due to overload, just sound like it but no actual electrical overload), then screen is covered with green or pink. I can still see the original picture image but overlayed by green or pink. See attached images. Pink.jpg is what I see, and Normal.jpg is before green or pink screen, What I captured was pink screen, but about 80% of time it's green and 20% of time it's pink.

                  Then each time...
                  02-23-2020, 01:29 AM
                • renech
                  panasonic TH-42PC77U plasma television half screen problem
                  by renech
                  hello,
                  I hope someone on this forum can assist me.
                  I have a panasonic TH-42PC77U plasma television.
                  the lower 1/2 of the screen has become flaky....in and out, then finally goes black and you can only see the top portion.
                  i have performed the reset to default settings quite a few times. Panasonic recommended..did not believe this would help...it didn't.
                  I have removed the back panel and looked around for something obvious...burn marks in a board, etc....nothing obvious...
                  I have read some posts that suggest the problem is related to the boards on the left...
                  12-12-2022, 06:53 PM
                • scubacamper
                  Sharp Aquos LC-70C6400U Half Screen Dark
                  by scubacamper
                  I found another post on this site the other day which has been very helpful in troubleshooting this issue I am having with my tv. The left half of the screen is dark, and the other half is VERY slow to generate it's image - and it only generates part of its image at that.
                  Based on this yt video, I have narrowed it down to an issue (short?) on the left side of the display, somewhere in the system of ribbon cables.
                  when I remove the bezel and the rear cover, I can get the image to display correctly by manipulating the ribbon cables on the left side which connects the left lower display...
                  https://youtu.be
                  05-03-2025, 12:19 PM
                • Loading...
                • No more items.
                Working...