Panasonic TC-P50GT30 screen washed out

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • djw43
    Senior Member
    • Mar 2015
    • 95
    • United States
    #41
    Re: Panasonic TC-P50GT30 screen washed out

    got the correct board back from moduslink , just installed it and...

    YAY it works!

    huge thanks out to tw2005!!
    and big thanks to nicholas1110 great catch!

    yee haa
    Attached Files

      Comment

      • tw2005
        Badcaps Legend
        • Oct 2011
        • 6458
        • Australia
        #42
        Re: Panasonic TC-P50GT30 screen washed out

        nice, we'll have to take note of this one. probably won't be the last time we see something like this. easy for people to not take into consideration that there are differences in board revisions and it did not cross my mind. Not something you'd expect but unlucky since someone else made the mistake. Introduced fault

          Comment

          Previous 1 2 3 template Next

          Related Topics

          Collapse
          • Ryan.man
            Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
            by Ryan.man
            Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

            My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

            This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
            02-04-2025, 12:23 PM
          • Chrissygizmo
            Panasonic TX-48CX350B backlights but white screen , blank screen
            by Chrissygizmo
            Hi all, I’ve got a problem I hope someone can help me fixi.
            I have a Panasonic TX-48CX350B tv , it powers up ok but the screen is blank, the backlights are working, there’s nothing else though, no picture or sound. I’m not sure what the fault is called whether it’s BLANK/ BLACK/ or WHITE SCREEN I’ve actually came across this before on a similar tv but just ended up scrapping it, I will upload pictures of the boards etc , if anyone could help me I would really appreciate it...
            01-11-2025, 03:18 PM
          • Alicat
            Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
            by Alicat
            Hello,

            Stopped by this site trying to fix my parents Panasonic Plasma TV.

            Model number is TH-50PZ85U

            Power comes on and the red power light stays on solid.

            Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

            I also hear a few clicks.

            I also think my parents said there was a thunderstorm and the TV failed after that.

            Section 6 in the service manual talks about power and no screen,...
            10-30-2024, 10:09 AM
          • reformatt
            Macbook Air M2 A2681 Kernel panics after screen replacement
            by reformatt
            Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

            It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
            07-31-2025, 08:37 PM
          • smic717394
            iphone XS turns off when press on screen.
            by smic717394
            Hi,

            I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
            07-25-2024, 10:16 AM
          • Loading...
          • No more items.
          Working...