Samsung ue40es600u no power

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Mark845
    Member
    • Sep 2014
    • 10
    • Durham
    #1

    Samsung ue40es600u no power

    My Samsung ue40es600u would not power this morning. So I've took the back of but i couldn't see anything that is burnt of anything like that. After I put the tv back together and plugged it in. It came on again but after I mounted it back on the wall it was not working again. I


    The psu inside is a bn44-0051b.

    I'm thinking the psu is on its way out . Would a simple psu replacement fix do you guys think? Or could it be something else.
    Tags: None
    • Alastair E
      Chief Womble
      • Mar 2013
      • 1963
      • U.K.
      #2
      Re: Samsung ue40es600u no power

      Take and post some clear pictures of the PSU, Mainboard and a shot of the whole TV chassis with the back off--Post 'em here.....
      TELEFIX

      How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
      http://www.irf.com/technical-info/appnotes/an-1088.pdf
      PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

        Comment

        Previous template Next

        Related Topics

        Collapse
        • PantherDave
          Microsoft Surface Pro (5th gen) model 1796 - no power
          by PantherDave
          Hi all!

          I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

          I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
          https://www.badcaps.net/forum/troubl...-hardware-devi...
          05-29-2024, 02:01 PM
        • sam_sam_sam
          Lift Master Garage Door wall switch display / motion sensor controller display disappeared no back light
          by sam_sam_sam
          This happened last Saturday and today I finally had time this morning before I went to work to replace two non brand capacitors

          I will let you be the judge weather or not these are bad or not according to the blue ESR meter that I am using

          I am comparing them to a brand new one that I installed

          The display came back on and the programming was not lost which I was surprised by I would have thought that when the display went blank that so did the memory as well

          I going to let it run for several days before I remount back on the wall next to the...
          09-05-2024, 06:48 PM
        • Journey11
          Samsung TV won't turn on ... keeps cycling the power relay on & off
          by Journey11
          Hi All,
          First time posting here ... my name is Kevin but my friends call me Journey.
          I have a Samsung 75" LCD model UN75RU8000FXZA that I don't remember the original fault other than it wouldn't power up anymore.
          After it sat for many month's I decide to look at it again. The motherboard seemed to have power regulation issues. After much fussing I decided to just get a new MB.
          It came a few days ago and I installed it now just cycles the power relay on and off ... when on the backlights light up and then dim and then relay kicks off and the whole things starts again....
          07-04-2024, 02:44 PM
        • Cooperr
          Samsung 59" plasma PN59D550C1F seeking advice on mystery power board issue
          by Cooperr
          I picked up this TV from Facebook Marketplace, original owner described it as "screen went black after a pop" and I hoped to see an obvious fuse or cap to replace. Doesn't seem to be the case, but my experience and electrical knowledge are kind of limited for this.

          The power board (BN44-00445A, see attached) turns on and Vs and Va seem to momentarily have power, then they steadily drain to zero over a minute or two as if they're only getting power from capacitors. I've been measuring Vs and Va from the test pads, with and without the other boards connected to the power board...
          10-21-2025, 01:11 PM
        • thetonywarren
          Samsung un32j5205af turns on, but needs to have power disconnected to power back on
          by thetonywarren
          SAMSUNG UN32J5205AF

          Wierd issue. Set turns on, works as normal, then turn off, and when you try to turn back on, it wont. The backlight comes on, but doesnt boot up. You need to disconnect power supply from back, then reconnect it, and then the set works again. somewhat annoying issue.

          Where to start? I can provide any videos or pictures needed to troubleshoot.......
          11-15-2022, 09:23 AM
        • Loading...
        • No more items.
        Working...