Killed t-con philips 42pfl5603

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zomi
    Badcaps Veteran
    • Nov 2011
    • 505
    #1

    Killed t-con philips 42pfl5603

    I have a philips 42pfl5603

    With bad tab bonds
    Was playing with the tab bonds
    Moving the metal frame while it was on

    Something happened now I have a black screen

    have i killed the t-con ?

    fuses on t con are fine.
    all volatges are now bad...

    Moral never mess with things when you are ill and tired
    Tags: None
    • zomi
      Badcaps Veteran
      • Nov 2011
      • 505
      #2
      Re: Killed t-con philips 42pfl5603

      Sorry ment to add is possible to have killed the a15s chip like this ?

        Comment

        • freakaftr8
          Badcaps Legend
          • Oct 2012
          • 3743
          • USA
          #3
          Re: Killed t-con philips 42pfl5603

          How about fuse on main board going to tcon?
          Did I leave the soldering iron on?

            Comment

            Previous template Next

            Related Topics

            Collapse
            • x_orange90_x
              TCL 50S535 bad tcon or panel issue?
              by x_orange90_x
              Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
              03-29-2025, 11:02 PM
            • advant
              Driving a Sharp TCON/panel with a universal main board
              by advant
              This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

              I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
              02-03-2020, 12:25 AM
            • Hakuu
              LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
              by Hakuu
              Hi There,

              This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

              After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

              More Details

              TV Model - LG OLED77G1PUA

              Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
              07-12-2023, 02:37 PM
            • Daren87
              Sony 8K XBR-75Z8H White Screen Vertical Bars Tcon Code. Help Needed🙏
              by Daren87
              Hello everyone,

              I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the...
              08-13-2023, 03:25 PM
            • alltvrepairs
              Lg TCon test pins for screen test
              by alltvrepairs
              Hi,
              i have a 65 Panasonic TX-65HX710E using vestel 17MB170 main and Lg tcon.

              Few drops of water fell probably near COF and have no display. Tried removing tabs but no.part of display present as if tcon fuse open. However 12v is present and tcon can be felt warm enough that supplies are present. Backlight and sound ok.

              Anyone knows if this TCon 6870c-0805A has any special test pins for rgb test?

              Appreciate your help....
              2 Photos
              06-13-2025, 06:33 AM
            • Loading...
            • No more items.
            Working...