sanyo dp52848 no power at all

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • timmypeeps
    Member
    • Jan 2015
    • 26
    • USA

    #1

    sanyo dp52848 no power at all

    I have a Sanyo dp52848 that has no power. No green light no standby light nothing. Checked the main fuse and it's good but after that I'm not sure where to look . All the caps look good. Any help would be greatly appreciated.
  • ReeceyBurger123
    Never Give Up !
    • May 2014
    • 7325
    • Britain

    #2
    Re: sanyo dp52848 no power at all

    If I were you start checking the bridge rectifier, pfc and switching section of the psu.
    Also could you take good clear photos of all the boards please.
    Last edited by ReeceyBurger123; 02-19-2015, 01:03 PM.
    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

    https://www.facebook.com/Telford-Tel...7894576335359/

    Comment

    • c_hegge
      Badcaps Legend
      • Sep 2009
      • 5219
      • Australia

      #3
      Re: sanyo dp52848 no power at all

      Moved to troubleshooting TVs and Video sources. This does not belong in the FAQ section.
      I love putting bad caps and flat batteries in fire and watching them explode!!

      No wonder it doesn't work! You installed the jumper wires backwards

      Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

      Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

      Comment

      Related Topics

      Collapse

      • Tynan Dill
        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
        by Tynan Dill
        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

        Upon bringing it home and plugging it up, it showed a standby light.

        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

        The screen seems to blackout and stay black, but with a flashlight I can see the display.

        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

        Assuming...
        11-22-2024, 01:46 PM
      • GLISIT
        Asus Probook P5440UF-XB74 power issue
        by GLISIT
        Hi all,

        TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


        I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

        A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
        01-16-2025, 02:29 PM
      • sam_sam_sam
        Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
        by sam_sam_sam
        I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

        One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
        03-31-2024, 02:12 PM
      • Mgiffune
        Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
        by Mgiffune
        I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

        I ordered a supposedly ‘new' Tcon board this time, and
        ...
        06-09-2024, 10:28 AM
      • Document Archive
        HP Pavilion Power Pavilion Power 15-cb009nl Notebook 15 Specification for Upgrade or Repair
        by Document Archive
        This specification for the HP Pavilion Power Pavilion Power 15-cb009nl Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Pavilion Power 15-cb009nl boardview and Pavilion Power 15-cb009nl schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...
        09-06-2024, 05:59 AM
      • Loading...
      • No more items.
      Working...