LG 37LF43 ZC - image problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • catalin004
    Member
    • Jan 2015
    • 35
    • Romania

    #1

    LG 37LF43 ZC - image problem

    Hy, I have a LCD tv that after 10 minttes the image apears like in image...I remove the T-con from Main, and I waiting 10 minutes with t-con deconnected, after I pluged in...It make same thing...I need help
    http://i59.tinypic.com/25owiee.jpg
  • Hamie
    Badcaps Legend
    • Apr 2014
    • 1383
    • UK

    #2
    Re: LG 37LF43 ZC - image problem

    Sure that model number is correct?

    Unhook half the tcon does the image appear ok on half the screen? If not plug back in and unhook the other side.

    Comment

    • catalin004
      Member
      • Jan 2015
      • 35
      • Romania

      #3
      Re: LG 37LF43 ZC - image problem

      sorry LF45...I will try what you said
      Last edited by catalin004; 02-08-2015, 09:27 AM.

      Comment

      Related Topics

      Collapse

      • jason123
        Hisense 65R6E3 double-image / horizontal strips - TCON?
        by jason123
        Hello all. 3 years back, with your help, I replaced the LEDs on this TV. It's been working great. Yesterday, I turned it on (garage TV), and it has blurred horiz / vert lines as you see in photos. Definitely no physical hit or damage. Top 1/6th of the screen is perfect. Could it be main / TCON board? No tabs to cut on this model. Thank you...
        07-19-2025, 08:07 AM
      • Track4207
        Hisense H50N5300UK reboots when showing full red images
        by Track4207
        Hi all! A bit of an interesting and unusual problem: as the the title suggests I have a Hisense H50N5300UK that reboots when showing fullscreen solid red images (and some other solid colours, but red generally causes the issue the fastest). I first came across the problem assuming it was an intermittent issue, but later lucked into finding out that a title sequence of a show I watch happened to trigger the reboot.

        What happens:
        • TV appears to operate normally, for an indefinite amount of time until a problem image appears
        • The problem image is displayed very briefly, then the
        ...
        08-30-2023, 11:58 AM
      • Document Archive
        HP Elite Slice G2 + Image Load & Asset Tag Elite Slice i5-7500T Specification for Upgrade or Repair
        by Document Archive
        This specification for the HP Elite Slice G2 + Image Load & Asset Tag can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Elite Slice G2 + Image Load & Asset Tag boardview and Elite Slice G2 + Image Load & Asset Tag schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
        09-12-2024, 02:20 PM
      • vabea
        Asus X550LD Image problem
        by vabea
        Hello i have this notebook Asus X550ld they work normal but the image appears with interference (like video attach) i have try, New lcd and a new cable, but unsuccessful if i connect to a external monitor the imagem in the external monitor is normal without interference, any help?
        Thanks...
        04-07-2025, 08:33 AM
      • THXFX
        samsung un43nu7100 BN94-13191C/BN41-02635A boot loop problem even with tcon jumper
        by THXFX
        Hi I need help with a Samsung un43nu7100 BN94-13191C/BN41-02635A with boot loop problem even with tcon jumper.
        I've already try tape method and same happen, if I disconnect both flex from mainboard to panel tv boots normal even I hear Samsung sound.
        When I solder jumper to make t-con work with or without panel or panel cables connected it still reboot or power cycling.
        What I noticed is that there's no voltage in VHG, HAVDD, PANEL_3.3V, AVDD_17V or 12v near dc-dc chip.
        I check capacitors and diodes and didn't find any short IN MAINBOARD.
        Measured all power supply...
        03-20-2024, 03:21 AM
      • Loading...
      • No more items.
      Working...