Hisense H50N5300UK reboots when showing full red images

[Track4207]

Re: Hisense H50N5300UK reboots when showing full red images

i dont think so... did you look at s,menu if r gain ready to 128 ?
i wrote t to change value then exit s,menu,,,, then after turn on log again see if change in place then clear chip

Sorry yes I should've said that I reset the R gain value to 128, closed the service menu and then put the TV into standby.

I then turned the TV back on and re-entered the service menu and ran the ‘Clean Chip' command.

I then put the TV back into standby again before turning it back on and showing the test pattern again.

by way.. if you have ready backup of channel and system on USB stick... don't use it to bring back your old setting and channel... cause it will written back the R Gain value too

I didn't realise the system could even be backed up over USB, that's something I'll have to make sure I do.