Westinghouse TW-62401-U046A No Power

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Gadjet
    Badcaps Veteran
    • Aug 2012
    • 248
    • United States
    #1

    Westinghouse TW-62401-U046A No Power

    TV wont power on, if I pull the ribbon on the left out it does. Tried installing a new eeprom same effect. Customer said tv fell or was dropped. screen shows fine when I pull the ribbon so no cracks. Could the ribbon be loose on the led panel where i can't see? let me know if I need more pics. This is the only board in the TV
    Attached Files
    Last edited by Gadjet; 02-06-2015, 05:41 PM. Reason: not enough info in title
    Tags: None
    • MagicSmoke
      Badcaps Veteran
      • Feb 2011
      • 275
      • USA
      #2
      Re: Westinghouse TW-62401-U046A No Power

      There's another post about this. Seems that the led strip on that side is shorted. Or the ribbon cable.

      https://www.badcaps.net/forum/showthread.php?t=31233
      Last edited by MagicSmoke; 02-06-2015, 05:47 PM.

        Comment

        • KAKUMASTER
          New Member
          • Feb 2015
          • 3
          • USA
          #3
          Re: Westinghouse TW-62401-U046A No Power

          I am have the same problem with no power my buddy used a 19vdc with 10ahr tv worked for a few hours ...then went out ...bought a new power supply with the correct specs and nothing..the cap and board look good ... help how do i check the voltage on the board (test point etc) help thanks in advance

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              ORIGINAL POWER SUPPLY BOARD
              7 Photos
              11-22-2024, 01:46 PM
            • PantherDave
              Microsoft Surface Pro (5th gen) model 1796 - no power
              by PantherDave
              Hi all!

              I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

              I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
              https://www.badcaps.net/forum/troubl...-hardware-devi...
              05-29-2024, 02:01 PM
            • GLISIT
              Asus Probook P5440UF-XB74 power issue
              by GLISIT
              Hi all,

              TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


              I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

              A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
              01-16-2025, 02:29 PM
            • sam_sam_sam
              Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
              by sam_sam_sam
              I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

              One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
              03-31-2024, 02:12 PM
            • Document Archive
              HP Pavilion Power Pavilion Power 15-cb009nl Notebook 15 Specification for Upgrade or Repair
              by Document Archive
              This specification for the HP Pavilion Power Pavilion Power 15-cb009nl Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Pavilion Power 15-cb009nl boardview and Pavilion Power 15-cb009nl schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...
              09-06-2024, 05:59 AM
            • Loading...
            • No more items.
            Working...