Does anybody know of a source for bonding film which isn't super expensive?

[lookimback]

This is what I'm referring too. http://www.stanleysupplyservices.com...film/p/429-788

It's a dry adhesive sheet for repairing circuit traces which have pulled from the board. I was about to order from that link until I realized how small that sheet is. It's only 1½" by 2¼", and would cost over $22 with shipping.

[attainteddragon]

Re: Does anybody know of a source for bonding film which isn't super expensive?

rs have an electric paint pen.
i have never used it, but it might suit your application.
http://au.rs-online.com/web/p/products/8352699/

the data sheet is on their page.

[stj]

Re: Does anybody know of a source for bonding film which isn't super expensive?

nano-silver paint is a fucking nightmare.

you could try smearing a thin layer of epoxy under the track.
something else good for general tacking down of stuff, is a glue called "UHU"
it sets like plastic and does not turn yellow.
i use it to tack down wires and large caps.

[lookimback]

Re: Does anybody know of a source for bonding film which isn't super expensive?

I'm hoping to avoid epoxies, just because they are messy. And they are a nightmare when the traces are small.

[lookimback]

Re: Does anybody know of a source for bonding film which isn't super expensive?

And the paint pens, I don't think you can solder to that.

[lookimback]

Re: Does anybody know of a source for bonding film which isn't super expensive?

I'm thinking that this might be nothing more and a heat activated tape. I can't find anything that can withstand the heat of soldering though.