Panasonic 50" TX-P50X50B advice please

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • piccy
    Member
    • Dec 2014
    • 37
    • Ireland

    #1

    Panasonic 50" TX-P50X50B advice please

    Just been given a Panasonic 50" TX-P50X50B for repair when the guy dropped it off he managed to crack the screen , is this a glass front or part of the display itself and is the set now useless or repairable still

    just for the record the initial fault was light blinking 7 times ,

    awaiting any replies , but guessing its a write off ....

    have looked on forum for and found replies re 7 light blinks (red) just none for 50x50 but if screen is still useable then will start repair process using these links
    Last edited by piccy; 01-12-2015, 03:48 PM.
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Panasonic 50" TX-P50X50B advice please

    Useless unfortunately. Though usually 7 blinks is due to a crack in the panel on these newer models. So, the crack probably just spread.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • piccy
      Member
      • Dec 2014
      • 37
      • Ireland

      #3
      Re: Panasonic 50" TX-P50X50B advice please

      Hi Tom66
      thanks for quick reply ,
      just had another look at the front of this tv the damage appears to be a deep ish scratch on the front with cracks running off from it but none of the crack lines are feelable with my fingernail on the outside of the screen, can you give me any pointers of what to check on this tv for the 7 lights fault , ie checking the panel or any other causes , apparently it has gone like this in past and come back on after a few days , or would the screen be classed as a hazard should it fail while working ?

      if still beyond hope is it worth keeping any of the panels from the unit or could they be faulty as well if the panel is cracked
      Last edited by piccy; 01-13-2015, 04:51 AM.

      Comment

      Related Topics

      Collapse

      • Andre Gilbert
        Panasonic TC-P55ST50 8 blinks then no blinks
        by Andre Gilbert
        Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
        Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

        TV Model: Panasonic TC-P55ST50
        ...
        11-20-2024, 08:52 PM
      • AquaMan Ua
        Problem with PANASONIC CF53 laptop after changing BIOS settings
        by AquaMan Ua
        Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
        05-17-2025, 09:40 AM
      • disorder
        panasonic 42E5X need advice before buying hdmi IC
        by disorder
        hello guys,

        got a panasonic tv lcd 42E5X series, totaly dead after storm lightning
        on inspection, the fault seems to came from motherboard
        hdmi chip tmds361B si totaly fried (big hole in center), have to search on service manual to know which chip it is lol

        don't see any damage at inspection, do you think it is valuable to buy and replace or this motherboard became just a crap ?

        thank you
        04-11-2021, 05:19 AM
      • zen
        Txl47e5b , panasonic nand chip advice
        by zen
        Hi all

        Issue with this set is that after a few minutes of working , the remote control & on board functions stop working .

        Current software version is 1267-10402 , which i assume is the latest available , as i cannot get set to take an upgrade.

        Managed to obtain a working main board , which has same software version .

        Transplanted the TSOP 48 NAND chip , IC8900 ( 29F4G08ABADA ) from the working board into the faulty board , which now is working .

        This proved NAND chip is the problem , in the form of corrupt data....
        02-02-2021, 11:51 AM
      • stecos
        Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
        by stecos
        Hi everyone!
        I happened several times, in the search for help from the web, to consult this very interesting forum.
        So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

        Having said that I come to the gist of my post on the forum as the title suggests.
        For my passion for technology I'm now collecting several...
        11-28-2022, 11:39 AM
      • Loading...
      • No more items.
      Working...