LG plasma 50PG20. Sound no picture

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sugar_ray
    Senior Member
    • Dec 2012
    • 121
    • Canada

    #1

    LG plasma 50PG20. Sound no picture

    LG-50PG20.
    Symptom: tv turns on just fine, audio can be heard but screen is completely black. No backlight, no flicker, nuttin

    What should I focus on here? Voltage checks just fine at power supply. No change when unplugging any harness.

    Bad Y??
  • rccrasher65
    Badcaps Veteran
    • Mar 2014
    • 622
    • United States

    #2
    Re: LG plasma 50PG20. Sound no picture

    Check buffer boards for shorts, very known problem in this set.

    Comment

    Related Topics

    Collapse

    • KYBOSH
      Hitachi 55HDS69 55" Plasma TV - No Picture But Sound
      by KYBOSH
      Picked up a bahemoth plasma TV not too long ago and just now getting around to looking at it.
      No picture but you hear the TV static (white noise) playing loud and clear.
      The back was already taken off (and no screws were provided) as the previous owner had already taken a look.
      But it seems they didn't get too far and just left it.

      When I first took a look I was amazed at how pristine the inside looked.
      Its as if the TV had been in a time capsule.
      Caps looked like they were just pulled off the self.
      Copper coils had no sign of corrosion on...
      02-01-2023, 11:10 PM
    • TR103
      Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
      by TR103
      Hi, I have a Samsung UE50TU with:
      - sound and backlight, but no picture
      - when it arrived, it had a picture for a few seconds
      - it keeps rebooting
      - without ribbon cable between the two panel boards, it does not reboot but I have no picture
      - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
      - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

      - without cable between mainboard and lcd panel and with a jumpered...
      01-22-2025, 04:12 PM
    • Mgiffune
      Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
      by Mgiffune
      I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

      I ordered a supposedly ‘new' Tcon board this time, and
      ...
      06-09-2024, 10:28 AM
    • Ierwin
      Samsung UE60KU6079 backlight okay mainboard responsive, no picture, no sound
      by Ierwin
      Hello everyone,
      Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
      The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
      He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
      I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
      Anyway I still fully expect that there has been something seriously damaged...
      05-13-2025, 03:31 PM
    • jchang
      Samsung UN70NU6900F no picture and no sound
      by jchang
      Hi all

      I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.



      Symptom:
      No picture no sound.
      When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
      No sound at all.



      What I tried:
      1. I tried unplugging the left or right ribbon...
      01-09-2023, 06:28 PM
    • Loading...
    • No more items.
    Working...