I've followed the installation instructions. The files are on the SD card. The tv recognizes the SD card but opens it in a photo viewer and says there are no photos to view. Will the TV ignore the files on the SD card if they are the same as the ones already installed?
-
-
Re: Having trouble updating firmware. Panasonic TC-P42C1
Try formatting it with this utility and then copy the files to it.
https://www.sdcard.org/downloads/formatter_4/
Also make sure there are no folders on the SD card, the firmware update should be located on the root (top level) of the SD card file structure. -
Re: Having trouble updating firmware. Panasonic TC-P42C1
That worked. Thanks!Comment
-
Re: Having trouble updating firmware. Panasonic TC-P42C1
No prob, glad it was easy.Comment
-
I have a Panasonc/vestel 55" 4K HDR TV and I need A copy of the Firmware.
I replaced the main board and someone gave me a 43" FINLUX firmware as it is a Panasonic Vestel version, it got the TV working again but the PIP will not work, I can only assume that it's because the Firmware thinks it is 43" tv?
I was greatfull for the TV to be workng again and it's been okay, but now I want to get it set up correctly.
If anyone has a copy of the firmware I need PLEASE help me out and send me A copy.
Greatfull for any help.
...01-11-2022, 07:44 PM -
Hi,
I have an Anker SoundCore 2 (A3105) that I saved from the trash (well, I guess there's a reason why it was supposed to go into the trash...). The problem is that it always turns off after a few seconds (sometimes it stays on a bit longer, between 30 and 60 seconds, but it still turns off). The power light turns on and the bluetooth light starts blinking, but both abruptly turn off again. The "turn off sound" is still played after the lights turn off. Sometimes, it also loops the on-off cycle several times without me pressing any buttons. If I connect an AUX cable, music...08-11-2025, 02:14 PM -
Hi all, am posting this for a friend so I don't have any photos of boards or anything, I know I should have all the information at hand with photos etc but I just thought I would try to find him the firmware he needs, I saw a thread on here where a user named "Diah" sent links to "l3emarsh" for the same firmware...
Basically, the standby light is constantly flashing & after reading posts on different sites I've come to the conclusion that it most likely is the firmware...
Any help would be appreciated
Thanks in advance -
I picked up a Panasonic NH-P70G2, though it would apply to the NH-P80G2, NH-P70G1 and NH-P80G1 models as well, as maybe some other models. This one was coming up with a H86 error. After lots of testing and googling it was an error with one of the thermistors in the condenser area.
The attached French service manuals is incorrect, TH11 is gray and is a 95k thermistor and TH12 is black and is a 35k thermistor.
In my case TH12 was bad. I was able to get a 35k thermistor on AliExpress. It's 6mm in diameter.
Unfortunately the whole machine has to come apart to fix it.
I have... -
I'm currently repairing an MSI Vector GP66 12UHSO laptop with a motherboard reference MS-15441 ver 1.0. The EC chip (ENE KB9548QF2) on the board appears to be damaged and needs to be reprogrammed.
Can someone please send me the firmware (EC/Embedded Controller) or indicate where I can download the correct EC firmware version corresponding to this motherboard model?
I already have access to the BIOS downloads on the MSI support page, but need specifically the EC binary or its equivalent firmware image.
I already downloaded the BIOS update file from msi official...
Comment