Re: LG 42pq6000
I can see one on the main board, just below the PC VGA input.....
I can see one on the main board, just below the PC VGA input.....
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: LG 42pq6000
yeah seen that its finding the cable to connect it though not sure if i have one though
p.s
remember i had that issue with accessing the last lg tv service mode i had to buy a URC 3940 maybe i can get in that way ?Comment
-
Re: LG 42pq6000
URC method may work, but I thought it didn't last time?
You will also need "Teraterm" or "PuTTY" on your computer.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: LG 42pq6000
USB to RS232
http://www.ebay.co.uk/itm/USB-2-0-Ma...item3f2db141c1
You may need a gender changer:
http://www.ebay.co.uk/itm/DB9-9-Pin-...item5aef7d1e22Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: LG 42pq6000
yeah it did work last time m8 i got into the service menu on the 32ld490
hmmm just need to remember how i done it last time ......Comment
-
Re: LG 42pq6000
right im in service mode what now factory reset ?Comment
-
Re: LG 42pq6000
tom its asking for a 4 digit code after the lg welcome screen tried 0000 what else ?Comment
-
Re: LG 42pq6000
Try 0413 tooPlease do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: LG 42pq6000
No m8 im searching around so far tried
1234
0000
3142
0413Comment
-
Re: LG 42pq6000
right im in strange enough i tried 0000 again and it workedComment
-
Re: LG 42pq6000
update : tv is now working menu showing and remote fully functioning and fingers crossed
the half image problem has stopped
how does a factory restart do this corrupted firmware tom ?Comment
-
Re: LG 42pq6000
one last thing tom in the input menu its showing AVI 1,2,3 but only two avi slots on the back of the tv and only HDMI 1 is showing in input how do you disable avi to swop for hdmi 2,3 etc ?Comment
-
Re: LG 42pq6000
AV3 may be for yellow/white/red
Other HDMI may be hidden in INPUT menu.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: LG 42pq6000
I am still confused how you saw the fault on the control board test. Maybe burn in, image retention or the fault is still there?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: LG 42pq6000
no fingers crossed the fault has gone but i did say when on a light picture i could slightly see it maybe it was image retention/burn in then ?
but thanks for your help m8Comment
-
Re: LG 42pq6000
Hi Tom. Do you know how to do a factory reset without the remote on the 42PQ6000?
They broke into my house a few months ago and made off with all the remotes
leaving the TV. This morning all I get is a white screen with V.3.30 scrolling across the TV
Comment
-
Re: LG 42pq6000
accessing LG service menus are a pain the only way i could get in was buying a URC 3940 universal remoteComment
-
Re: LG 42pq6000
I live in Namibia, West Africa. They aren't exactly a dime a dozen here...
Comment
-
Re: LG 42pq6000
well im not sure of another way of accessing the service menu without a remote sorryComment
-
Hello all, I've been looking into this portable air conditioner's remote control and can't find what could be causing the problem - or possibly this remote is just terribly designed.
The remote only works at exactly 3V - if I drop it any lower, using my bench power supply, to say, 2.9V then the remote will not flash the display and turn off. I don't have any AAA batteries that are exactly 1.5V each so I'm not sure if this remote is designed this way - to only use the freshest possible batteries, or if there's a failed component in the mix.
I can't find any schematics... -
I’ve got a subwoofer that I’ve had for nearly 20 years, it did come with a basic remote which I’ve lost. It’s a generic make of subwoofer, I can’t see a brand sticker on it. It comes with 2 speakers.
Question recently I’ve connected it up to my tv which has greatly improved the sound on my tv, however I’d like to be able to mute the subwoofer when ads come on or just mute it when the phone rings etc. I tried using a cheap all in one tv remote on the subwoofer and the volume button would only work to increase volume but not turn it down or mute it
Is there... -
I have this receiver for at least 10 years. Usually, we just use the remote for turning on/off and adjusting the volume. Recently, the remote control started not able to turn the receiver on. Later, the volume also could not be adjusted by the remote control.
At first, I thought that it was the usual problem which can be fixed by cleaning the contacts on the switches and the pcb. I opened the remote and clean it with alcohol. The remote did work again after that. But after one day, it did not work again. I opened it again and clean with alcohol and contact cleaner. Again it worked... -
Hi,
I have this TV a small 20 inch that works perfectly except for the IR has stopped. I have confirmed that the remote control is fine and tried an alternative and even tried with IR blaster from phone. Remote 100% ok.
Tried installing latest firmware but no change.
TV won't respond to remote at all, not even to bring it out of standby. I have to use the touch sensitive front panel to operate, at which point TV is usable albeit with no remote.
Tried replacing the IR receiver diode/bulb on front panel and no change so put the old one back. After tracing... -
I have a rgb "holiday symphony" 600 led tree that I got for free but it has no remote which basically neuters the tree with just one color option and no music. The original remote is as 433.96 mhz rf remote. Here is the fcc link: https://fccid.io/2APJZ-PDT0093V.
The manufacturer is Polygroup and are absolutely no help. As they offer no replacements to the most easily lost part. All they gave me was the model number of the remote and said google it and good luck. Of course nobody is selling them. Anyways I provided pictures of the reciever motherboard along with the rgb...
Comment