Issue with color - vizio

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mmoore5553
    Senior Member
    • Oct 2013
    • 171
    • United States
    #1

    Issue with color - vizio

    I am needing some help on this. It is my parent's tv and it is showing odd colors. I do not have model number because it is too ackward and heavy for them to get to it. I am going down during christmas to take a look.

    Is this something that can be fixed or is it a bad panel ? I thought it might be a t con board but never seen where it turns things red and not the whole screen.

    I would like some input if worth fixing or it is a bad panel .

    I wish i had a better picture but took me 30 minutes to walk parent's through getting this one.

    Thank you everyone.
    Attached Files
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12206
      • U.S.
      #2
      Re: Issue with color - vizio

      could be tcon, could just be poor connection on lvds cable going to tcon, tcon voltages can be tested, you can probably get a tcon for 15-30 dollars. be careful when working around power supply aka g board, the big things that look like lots of electricity can run thru them do, you can get a major shock.
      Last edited by nomoresonys; 12-14-2014, 02:53 PM.
      Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

        Comment

        • mmoore5553
          Senior Member
          • Oct 2013
          • 171
          • United States
          #3
          Re: Issue with color - vizio

          Would not be my first time getting shocked. Here is the model number SV420XVT1

            Comment

            Previous template Next

            Related Topics

            Collapse
            • EazyBone
              Vizio P759-G1, Tcon issue?
              by EazyBone
              Got this TV free. Guy said it tries to turn on and doesn't. I haven't seen this specific issue before but shown in video. Any way to test the screen to rule it out on these Vizio? Or anyone seen this issue before?

              Any help appreciated

              https://youtu.be/tPeV2Q7TXIQ?feature=shared
              03-22-2024, 03:25 PM
            • x_orange90_x
              TCL 50S535 bad tcon or panel issue?
              by x_orange90_x
              Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
              03-29-2025, 11:02 PM
            • thelankanguy
              Sony KD-55X9000F TCON Issue
              by thelankanguy
              The TV shows a black screen with no image.
              TCON ribbon connectors were disconnected individually for image and there was no half image even.
              Later both ribbons were disconnected and TCON voltages were tested.
              12V, 3.3V, 1.8V were seen present but VONE signal reads 0V.
              There is also a short to ground in this circled inductor.
              Is this a TCON issue or something else ?...
              12-13-2024, 12:27 AM
            • Fly_Among_Stars
              VIZIO E70-E3 Half picture with half TCON
              by Fly_Among_Stars
              Hi,
              I have a VIZIO E70-E3.
              Symptoms: Black screen, no picture, but LED backlights are working.
              I probed the power board and voltages are as listed on the board.
              Main board appears fine, too.
              I believe the problem is either a bad T-CON board, or connection to LCD, or bad LCD.
              There are two separate ribbon cables feeding the LCD.
              If both are connected, the screen is black.

              If only the ribbon cable that feeds the right side of the screen (when viewed from the front) is disconnected, the left side of the screen shows picture and...
              04-24-2023, 08:20 PM
            • cagri
              BOE HV650QUB-F70 TCON issue - VGH AVDD HAVDD no voltage - caps seem ok
              by cagri
              I have an Arcelik TV with BOE HV650QUB-F70 TCON board, but I think there's an issue with/around PMIC.
              PMIC: iML8940

              There is backlight and sound, but no picture. I watched a YouTube video and turned it off, half an hour later it was dead.

              Input 12v, fuse ok
              DVDD1V2 = 1.2v
              DVDD1V8 = 1.8v
              DVDD3V3 = 3.3v
              VGL = -7v
              **VGH = -0.3v
              **VCOM0, AVDD, HAVDD = 0v
              SWBK1 = 3.3v
              SW1 = 12v

              VGH to GND resistance is 500kohm as expected

              Readings are same after I disconnected the two cables from TCON to panel...
              07-27-2023, 09:48 PM
            • Loading...
            • No more items.
            Working...