Announcement

Collapse
No announcement yet.

Toshiba 40l1333b power on squence any one know ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Toshiba 40l1333b power on squence any one know ?

    Just replaced the main board in the 40l1333b
    And for the life of me I cant remember what the correct power on squence should be

    the tv on start up goes from red to green a few times then powers on and works as normal.

    On power off the red light flashes and it turns off.

    Is this normal, I can't rememb what it should be.

    The last of the vestel tv's I ended up with..

    #2
    Re: Toshiba 40l1333b power on squence any one know ?

    That sounds right for a Vestel. The LED colour can vary and sometimes there's only one colour. One Toshiba Vestel junker I had would flash red/green about 5 times when plugged in. It would then go off for 1/2 second and then go red. Once it had done that, you could turn it on by pressing the power button. It would flash red/green about 10 seconds and then turn on.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    Working...
    X