Sharp LC37GD8E c7558?

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • michael dranfield
    Badcaps Veteran
    • Jan 2016
    • 232
    • England
    #21
    Re: Sharp LC37GD8E c7558?

    With this set if the error counted has counted 5 failed attempts to strike the lamps this information is stored in the main micro and what ever you replace the set will still not come on untill you reset the error counter to zero.

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • Burned
        Sharp Aquos PN-LE801 shutting down
        by Burned
        Hello,

        I have a Sharp TV that is powering on with backlight and picture then after 5 seconds it turns off. The front LED blinks after shutting down.

        I checked the power board voltages and have 12v, 5v and 3.3v on the standby when first turned on then the STB goes down to 1.4v after a second.

        Where should I go from here?
        11-15-2021, 06:16 PM
      • Maniackk
        Yoga 530-14ARR NM-B781 Ryzen 3 2200 – overheating and shutting down under load
        by Maniackk
        Hi,

        I’ve got a stubborn patient here. The laptop powers on and works, all components like the screen, keyboard, touchpad, etc. are functional. The issue is that it heats up very quickly under load (within a few minutes up to 95°C) and then shuts down shortly after. Subsequent attempts to turn it back on right after a “hot shutdown” result in it shutting off within a few seconds. Interestingly, if I enter the BIOS, it can stay there for 2 days without shutting down (most likely due to low CPU load and low temperatures).

        The cooling system has been cleaned, thermal...
        09-03-2025, 09:32 AM
      • advant
        Driving a Sharp TCON/panel with a universal main board
        by advant
        This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

        I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
        02-03-2020, 12:25 AM
      • sefoster
        Sharp Aquos Lc-80LE757U flashing Sharp on screen when plugged in
        by sefoster
        I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp...
        11-20-2022, 09:29 AM
      • SONY_E-WASTER
        Help! Sharp LC-70UE30U 3 long flashes + 3 short flashes.
        by SONY_E-WASTER
        Hello, I'm new to this forum. I like to tinker with Sony electronics, I have been lucky trouble shooting sony stuff, But I can't find much info on this Sharp TV.

        The problem; plug to power>white led power indicator light is on>it turns on to the red Sharp logo>
        then the android logo is displayed, lit fine then the android logo brightness varies, then lit normal, then the tv restarts and does the same startup logos over and over for 5 times then it turns off and the power indicator light flashes the trouble code 3 long blinks plus 3 short blinks .

        does...
        12-26-2021, 05:46 PM
      • Loading...
      • No more items.
      Working...