I have a Sony KDL-60EX645 that runs for about 30mins then shuts off and starts flashing a code 6. After about 10mins it will turn back on.
I am fortunate enough to have two of these tvs.
1. I have swapped all three boards separately Main board, Power Supply, T-con...
2. I then took all off the broken tv's board put them in my working tv and the working tv works fine! The problem did not move with boards.
3. I then uplugged buttons and wireless adapter(grabbing at straws) no change in failure.
I am leaning toward a bad backlight.... If this is the case how could I find the short? Maybe its a cold solder joint once it warms up? Can this be fixed?
Thanks
Cpu77
I am fortunate enough to have two of these tvs.
1. I have swapped all three boards separately Main board, Power Supply, T-con...
2. I then took all off the broken tv's board put them in my working tv and the working tv works fine! The problem did not move with boards.
3. I then uplugged buttons and wireless adapter(grabbing at straws) no change in failure.
I am leaning toward a bad backlight.... If this is the case how could I find the short? Maybe its a cold solder joint once it warms up? Can this be fixed?
Thanks
Cpu77