LG 50PS3000 clicks

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vili23
    Member
    • Sep 2014
    • 24
    • Croatia

    #21
    Re: LG 50PS3000 clicks

    Hi!
    I got my board and the tv works but there are vertical lines acros the screen.
    I tried cleaning the panel ribbon cables which go to y-sustain board and reseating them but it didnt help.
    Is it a bad panel or is there a chance to repair the tv?
    Attached Files

    Comment

    • vili23
      Member
      • Sep 2014
      • 24
      • Croatia

      #22
      Re: LG 50PS3000 clicks

      bump

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #23
        Re: LG 50PS3000 clicks

        Bad panel I'm afraid.
        Seems a common fault on these and any LG plasma, shame really :/
        Did it have this fault before it failed?
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • vili23
          Member
          • Sep 2014
          • 24
          • Croatia

          #24
          Re: LG 50PS3000 clicks

          Ok i thougt so
          I dont know about the fault,i got it in this condition but it was free
          Thanx Tom for your help!

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #25
            Re: LG 50PS3000 clicks

            I found one of these on the side of the road for free.
            Got it working, panel good, but stand was wrecked... still, not bad for free.
            Last edited by tom66; 10-09-2014, 09:47 AM.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            Related Topics

            Collapse

            • Maniackk
              Reader PocketBook InkPad 3 – identification of a black component marked 'CT' on the microUSB line
              by Maniackk
              Hello,

              Device: PocketBook InkPad 3
              Mainboard: XRZ_E091_PB740-VTTOA-V1.1 / 2017-10-12

              I'm replacing the broken microUSB connector on this e-reader, and during inspection after desoldering, I noticed a loose black SMD component marked "CT". One of them was torn off along with the pad, while the other one (marked in the photo) is still in place.

              I would appreciate help identifying this component.

              Measuring the loose component with a multimeter gives 5.84 MΩ in both directions, while the one still on the board shows no measurable...
              05-16-2025, 08:53 AM
            • GRANDGG
              LG 42lw4500 flashing red light , wight light , 2 clicks
              by GRANDGG
              Hi i have an issue with LG 42lw4500 wich after pressing the power button flashes red then goes solid white light 2 clicks and nothing , the weird thing is SOMETIMES if i leave the tv plugged in it would come on and fuction normally (i should mention that vertical rectangle going from the bottom to the top of the screen have some red dot artafacts it only appear in somthing like the tv input menu and any input i give like vga , but not in the system menu , i thought i should mention this , i cannot confirme if the tv had this issue when it was up and running in its previous owner . ) when checking...
              05-09-2025, 12:27 PM
            • Francesc V.
              Diode marked as "E57".........not able to find it by reference
              by Francesc V.
              Hi:

              I have what it might seem a zener diode. It's marked as E57, but I haven't found any reference that might match my observations.

              I've took one from the same circuit and tested isolated with the power supply and a 1k resistor. with 10V, the possible zener stays at 6.6V.

              It seems a SOD123 package. It measures (2.6mm x 1.6 mm).

              Any idea? it's a 6.6V zener?

              ...
              06-14-2025, 09:56 AM
            • ahoonid
              A1708 820-00840 No boot - trackpad clicks - 20V 0.55amp
              by ahoonid
              Hi everyone.

              I have MacBook Pro A1708 with a confusing issue.
              The laptop doesn't turn on. Strangely, the trackpad clicks and fan spins. Caps lock doesn't turn on and no chime.

              Initially, the amp meter didn't turn on at all on one of the usb c ports. On the other port, I got 20V and half an amp tho (no battery connected).
              I replaced the bad CD3215 chip and now it works as well. Both ports turn on with same amp readings.

              The initial issue however remains.
              No boot. No backlight. No chime. No keyboard. Only signs of life are clickable trackpad...
              05-10-2025, 04:19 PM
            • klynstronic
              Regulatory code marked as H50A
              by klynstronic
              Hello. Does anyone know the code for this regulator marked H50A A121?​...
              04-23-2025, 11:08 AM
            • Loading...
            • No more items.
            Working...