Re: RCA (Thomson) F20TF10 in a coma
Fuse MP 50 can be repaired using a wire from the glass fuse of the same rating. Gently crush him, and to get the wire soldered to the conclusions of the burnt MP 50(wire soldered directly to the terminals closer to the body) pre-checked load resistance after the fuse in the circuit, which would not be short-circuited. 7809 test separately from the TV. Applied to the input (pin 1 and 2) 12-volt power supply and check the voltage at the output (pin 3 and 2)
Fuse MP 50 can be repaired using a wire from the glass fuse of the same rating. Gently crush him, and to get the wire soldered to the conclusions of the burnt MP 50(wire soldered directly to the terminals closer to the body) pre-checked load resistance after the fuse in the circuit, which would not be short-circuited. 7809 test separately from the TV. Applied to the input (pin 1 and 2) 12-volt power supply and check the voltage at the output (pin 3 and 2)
Comment