Re: Insignia NS-55L260A13 LCD TV Won't stay on
I have found that these power boards have problems with loose solder joints. If your TV is dead or won't stay on check the solder joints on RT802 first and then inspect the entire board. If your TV still has problems staying on then Check the temperature of the RT802 when the TV turns off, if you find it to be hot then add a heat sink to it and place a small fan blowing at it, if your TV stays on after that then replace RT802 and keep the heat sink on it. You might also want to install a cooling fan so it never burns up again.
I have found that these power boards have problems with loose solder joints. If your TV is dead or won't stay on check the solder joints on RT802 first and then inspect the entire board. If your TV still has problems staying on then Check the temperature of the RT802 when the TV turns off, if you find it to be hot then add a heat sink to it and place a small fan blowing at it, if your TV stays on after that then replace RT802 and keep the heat sink on it. You might also want to install a cooling fan so it never burns up again.
Comment