Hello.. I'm currently having problems with my plasma unit LG 50PT350. I plug unit in and get standby and front touch panel works. I turn unit on and get a slight grey glow with no picture or sound. My power supply Vs (55) and Va (205) any advise is GREATLY appreciated.. Thanks
-
-
Re: LG 50PT350-UD (No picture) (No sound)
I now have sound on HDMI input3 but no picture still.. And ideas? Thanks -
Re: LG 50PT350-UD (No picture) (No sound)
Comment
-
Re: LG 50PT350-UD (No picture) (No sound)
Comment
-
Re: LG 50PT350-UD (No picture) (No sound)
Comment
-
Re: LG 50PT350-UD (No picture) (No sound)
Comment
-
Re: LG 50PT350-UD (No picture) (No sound)
Comment
-
Re: LG 50PT350-UD (No picture) (No sound)
Comment
-
Re: LG 50PT350-UD (No picture) (No sound)
Update: I've read some other forums I've done the part where you take a piece of wire and stick one end into hole says EXT_AUTO_GEN and one next to it on logic board and unplugged the ribbon cable that goes to main board. I power on the unit after and the TV goes thru a color/screen cycle with no problem. Does this mean my main board is bad? Thanks!!Comment
-
Re: LG 50PT350-UD (No picture) (No sound)
Yes, that confirms the main board to be badPlease do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: LG 50PT350-UD (No picture) (No sound)
Hello I am having the same issue if you run that test that means you have to replace that board or the main board with all of the inputs.Last edited by Curtler; 04-14-2016, 02:06 PM.Comment
-
Re: LG 50PT350-UD (No picture) (No sound)
Yes.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... -
Hello everyone,
Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
Anyway I still fully expect that there has been something seriously damaged... -
Hi all
I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.
Symptom:
No picture no sound.
When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
No sound at all.
What I tried:
1. I tried unplugging the left or right ribbon... -
so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!!
what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol! 
i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
Comment