Re: LG 50PT350-UD (No picture) (No sound)
Update: I've read some other forums I've done the part where you take a piece of wire and stick one end into hole says EXT_AUTO_GEN and one next to it on logic board and unplugged the ribbon cable that goes to main board. I power on the unit after and the TV goes thru a color/screen cycle with no problem. Does this mean my main board is bad? Thanks!!
Gibson1986
Member
Last Activity: 09-12-2014, 07:57 AM
Joined: 09-08-2014
Location: Pinckneyville, Illinois
-
Re: LG 50PT350-UD (No picture) (No sound)...Leave a comment:
-
Re: LG 50PT350-UD (No picture) (No sound)...Leave a comment:
-
Re: LG 50PT350-UD (No picture) (No sound)...Leave a comment:
-
Re: LG 50PT350-UD (No picture) (No sound)...Leave a comment:
-
Re: LG 50PT350-UD (No picture) (No sound)...Leave a comment:
-
Re: LG 50PT350-UD (No picture) (No sound)...Leave a comment:
-
Re: LG 50PT350-UD (No picture) (No sound)
I now have sound on HDMI input3 but no picture still.. And ideas? ThanksLeave a comment:
-
LG 50PT350-UD (No picture) (No sound)
Hello.. I'm currently having problems with my plasma unit LG 50PT350. I plug unit in and get standby and front touch panel works. I turn unit on and get a slight grey glow with no picture or sound. My power supply Vs (55) and Va (205) any advise is GREATLY appreciated.. Thanks -
Re: LG 50PT350 Help
Help.. I'm also having a similar problem with my plasma I get power but no picture or sound I turn unit on and get slightly a grey glow was recommended to replace YSUS and Y buffer boards but didn't help any. I've done the wire in EXT_AUTO_GEN and hole next to it and it goes thru the color cycle any ideas?Leave a comment:
No activity results to display
Leave a comment: