Toshiba / Vestel 42L2863DG stuck with logo on.

[alltvrepairs]

Hi ,
have this set with logo stays on and stanby led blining red to green continuos.
i have swapped power supply just in case but no difference.

Am thinking of needing a firmware update by usb or spi flash?

Any one has access to such resource pls?

Main 17MB211S
Screen :VES430UNDL-2D-N12
Label: 10121357 19059 00040
-SN: 8238705 900040

Thanks,
Darren

[yokoono]

Try at your own risk.
https://files.fm/u/569jew8nud

[alltvrepairs]

Try at your own risk.
https://files.fm/u/569jew8nud

Hi,
Thanks for your reply.

I see from the dump that will eventually clears the SPI flash memory etc. Before trying it out, can I ask if you have copied it from a tested envirenment please?

Regards,
Darren

[yokoono]

You have a broken TV. If you want to try, if not, don't try. You can remove the flash memory and copy the bin.

[alltvrepairs]

You have a broken TV. If you want to try, if not, don't try. You can remove the flash memory and copy the bin.

ok mate, I have just asked you just in case you have some info on the orgins of the file . As currently there is some display and if totally bricked probably cannot go back.
Tks for your time !