Hi guys purchased a tv from someone and it had a good few bulging caps so i replaced and tv started up no problem. However there is a few lines running down the screen on the left hand side and just one line on the right side. Can this be fixed ?
Announcement
Collapse
No announcement yet.
lines on LG 50PG3000
Collapse
X
-
Re: lines on LG 50PG3000
Unfortunately it is a reasonably common problem on these models and is due to a bad plasma panel. It is not fixable. That being said, I had no difficulty selling a 42PG3000 on with a similar fault. I got about 30% less than normal, but still was able to make a profit, so not so bad in the end.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
-
Re: lines on LG 50PG3000
Hmm :/ that is pretty bad.
The worst I got so far is a single line
https://www.badcaps.net/forum/attach...8&d=1397686557
https://www.badcaps.net/forum/attach...6&d=1397686557Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Comment
-
Re: lines on LG 50PG3000
Hi,
First, this is my first post on this forum...
I have exactly the same problem as Mikeyboy2007.
After repairing the PSU for capacitors (C232, C233, C234, C235, C236 & C241); the tv starts without problem but I have 5 vertical lines on the full height of the image.
I used a software (http://www.webalice.it/fulvio.cornetta/) to generate signals for tv and we can see that the lines do not appear if the image is green or red (see photos ).
Is this problem also a faulty plasma screen?
Thank you for your help.
Maximilius
Comment
Comment