Sanyo DP42647 - No Picture - Sound and Backlight OK

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • selldoor
    Slow Learner
    • Dec 2010
    • 7870

    #21
    Re: Sanyo DP42647 - No Picture - Sound and Backlight OK

    Ok the voltage regulator is correct MAX chip must have been in another thread or even another forum - sorry for wasting your time .
    The AS15f chip is a common failing on this and other T cons lately - that is what we were trying to test but I have not seen anyone come up with zero. So if you are able to replace it you could try that otherwise it is board replacement time
    Please upload pictures using attachment function when ask for help on the repair
    http://www.badcaps.net/forum/showthread.php?t=39740

    Comment

    • Frimp
      Member
      • Jul 2014
      • 22
      • United States

      #22
      Re: Sanyo DP42647 - No Picture - Sound and Backlight OK

      Thanks selldoor - Jimmy's does not have the board in stock but I think I have found a used one. I'll let you know if it fixes the problem.
      Thanks for all your help.

      Comment

      • Frimp
        Member
        • Jul 2014
        • 22
        • United States

        #23
        Re: Sanyo DP42647 - No Picture - Sound and Backlight OK

        Turned out the board was not available and then the TV fell and I broke the small board on the side. I put it back together and have begun a search for a "parts TV". Thanks to all for the help. This is a great forum with some very good members! Thanks again.

        Comment

        Related Topics

        Collapse

        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          11-22-2024, 01:46 PM
        • m1ch43lzm
          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
          by m1ch43lzm
          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
          05-12-2025, 08:37 PM
        • TR103
          Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
          by TR103
          Hi, I have a Samsung UE50TU with:
          - sound and backlight, but no picture
          - when it arrived, it had a picture for a few seconds
          - it keeps rebooting
          - without ribbon cable between the two panel boards, it does not reboot but I have no picture
          - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
          - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

          - without cable between mainboard and lcd panel and with a jumpered...
          01-22-2025, 04:12 PM
        • howardc64
          TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
          by howardc64
          All left and right refers to looking from rear of TV (or looking from front with TV upside down)
          • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
          • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
          ...
          07-24-2025, 05:17 PM
        • slimmy182
          [SOLVED] M1 MacBook Pro clicking sound logic board 5V no power on A2338 820-02020
          by slimmy182
          Hello, I bought this Mac from a friend, he said that it simply stop working. The MacBook looks very clean but does not power on, stuck on 5v 0.42A, and sometimes display 5V and 0A (then 0.071A and again 0A).

          I opened it looking for some problem, it was not touched before for sure and the board is very clena, no spot of corrosion at all from what I can see. Voltage on multimeter of the board off the case it's the same, 5V 0.42A. But then I noticed this "clicking sound" come from the board ( I attached here the audio file).

          Looking on google I found this:...
          01-14-2023, 11:55 AM
        • Loading...
        • No more items.
        Working...