Hi, im here with another problem, i have a LCD OKI 26" with this:
when i power it on, half of the screen is ok, the other one is with multicolor vertical lines, after a few seconds, the screen is ok, but in the center of the screen remains 2 vertical lines.
i have repaired power supply, it have 2 bad caps there, but the fail persists.
Any tip¿?
when i power it on, half of the screen is ok, the other one is with multicolor vertical lines, after a few seconds, the screen is ok, but in the center of the screen remains 2 vertical lines.
i have repaired power supply, it have 2 bad caps there, but the fail persists.
Any tip¿?
Comment