Could anyone point out the upper Y-buffer on this panel to me please?
Thanks in advance
Thanks in advance
Attached Files
-
-
-
Re: LG 50PG3000 Y-Buffer
see pic.....Attached FilesProud owner of dozens of broken TV's and many,many,many boards.
Our website and passion:http://hollenhundshepherds.com/Comment
-
-
Re: LG 50PG3000 Y-Buffer
Please do not start multiple threads for the same set. - Just wastes our timePlease upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
This specification for the HP EliteDesk 800 G3 + OfficeConnect OC20 2x2 Dual Radio 802.11ac (RW) Access Point can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the EliteDesk 800 G3 + OfficeConnect OC20 2x2 Dual Radio 802.11ac (RW) Access Point boardview and EliteDesk 800 G3 + OfficeConnect OC20 2x2 Dual Radio 802.11ac (RW) Access Point schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information....09-12-2024, 02:00 PM
-
I just acquired this portable aircon, history unknown. Its behaviour is quite strange:
- When turned on and placed into cooling mode, the upper fan (cold air out) just spins slowly. The compressor and lower fan do not run.
- If the device is then placed into heating mode and then back into cooling mode, the lower fan and compressor kick in and start cooling, but the upper fan still only spins slowly.
- If the device is placed into fan-only mode, the upper fan does not respond to low/medium/high speed toggles - just keeps running slowly.
- Display and buttons all behave normally aside from the
-
Hi everyone, I am new to here,
My friend gave me a dead 82” TU7000 with black screen. Backlight worked. I replaced it with a main board from a panel cracked 58” TU7000 and it did display but with vertical/horizontall lines. Therefore, it is for sure, the problem is on the mainboard.
The main board came with VPMS3SM and at 58", it was VPMS3RT. Not much info found on these devices. The board had 3.3, 1.8, 1.9 as well as 12.8V which was from the power board. In this topic: Samsung LH50QETELGCXGO It told me that VPMS3SM was disabled and jumper is required to bypass... -
Hi
i have a a2179 which is locked. On the other hand I have an unlock t2chip(just the upper layer of ic)I wanna know if I can just change the upper layer of the t2 chip.
any way does anyone know what each layer do?08-03-2024, 01:46 AM -
hi i want to unlock my advance setting on my 100-14lbd laptop hope you can help me...
Comment