Could anyone point out the upper Y-buffer on this panel to me please?
Thanks in advance
Thanks in advance
Attached Files
-
-
-
Re: LG 50PG3000 Y-Buffer
see pic.....Attached FilesProud owner of dozens of broken TV's and many,many,many boards.
Our website and passion:http://hollenhundshepherds.com/Comment
-
-
Re: LG 50PG3000 Y-Buffer
Please do not start multiple threads for the same set. - Just wastes our timePlease upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
This specification for the HP EliteDesk 800 G3 + OfficeConnect OC20 2x2 Dual Radio 802.11ac (RW) Access Point can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the EliteDesk 800 G3 + OfficeConnect OC20 2x2 Dual Radio 802.11ac (RW) Access Point boardview and EliteDesk 800 G3 + OfficeConnect OC20 2x2 Dual Radio 802.11ac (RW) Access Point schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information....09-12-2024, 02:00 PM
-
Hi
i have a a2179 which is locked. On the other hand I have an unlock t2chip(just the upper layer of ic)I wanna know if I can just change the upper layer of the t2 chip.
any way does anyone know what each layer do?08-03-2024, 01:46 AM -
hi i want to unlock my advance setting on my 100-14lbd laptop hope you can help me... -
Hi , I am looking TP point for KLMAG1ETD in MT58CU chassis TCL .I have not seen it in UFI pictures . -
So like the title says, I have an old Stereo Receiver/Amplifier that I picked up from the goodwill, it's a HH Scott Model A510. When I first got it home it had zero output. Opened it up, notice the fuses are missing. Pop in 2 new fuses (AGC4A 250V) and try again, within 5 seconds the L channel fuse POP! I don't see any visible indications of damage or arc burns on the PCB, no popped resistors or diodes, no burnt traces or blown out caps. So I decide to just try another new fuse, POP. Swapped around my R and L speaker wires, and checked the integrity of all wires and connections. Everything looks...
Comment