Re: Sceptre x322bv-hd powers up w/sound-but no picture
That is the high voltage winding, I expect to hear some arcing sound before it goes into shutdown mode. BTW, you need to use 2K Ohm range to check the resistance. It does look like it has been arcing.
Re: Sceptre x322bv-hd powers up w/sound-but no picture
Just wanted to shoot an update this post. I went ahead and replaced the entire power board as a unit, although I'm pretty sure the high voltage winding as Budm mentioned was the culprit. Once installed...walla! I got backlight coming on, and once all put back together the set has been working since. I wanted to thank this awesome forum and specifically Budm & DGtech for jumping in to assist, couldn't have done it without you guys.
Re: Sceptre x322bv-hd powers up w/sound-but no picture
Maybe an old thread, but I have a similar issue with a Sceptre I'm working on for a friend. Is anybody still there? I followed this thread and measured voltage output on the board and it's very close to what was in the pic here. The picture is so dark you can't see it unless you hold a flashlight up to the screen, but when you do the picture is fine (where you can actually see the light from the flashlight that is). Any ideas? New to this forum btw. Please be nice. ;-) I've gone to school to work on medical equipment, but I'm a little rusty and haven't worked on these types of units. Thanks in advance! The model is x322bv-hd.
Comment