teac lcd red flashes on shutdown

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • himinshed
    Member
    • Aug 2013
    • 20
    • australia
    #1

    teac lcd red flashes on shutdown

    teac lcd3255hd stopped working after a pop was heard dont know if it was from the speakers of set ,,just a update ,,
    i warmed up the psu with a heatgun and the menu display came up for a short time,when i press the power off button i get10 or 12 red flashes i have no idea what thi code can signify can anyone please help cheers himinshed
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • odie34
      Sony OLED XR-77A80J - 5 Flashes But Turn On After Hard Reset
      by odie34
      I am a hobbyist (not a professional) so please be gentle...

      I recently received an XR-77A80J that wouldn't turn on. (Repeating 5 flashes when plugged in.)

      I did a hard reset by holding the power button for about 30 seconds until the set powered down. I then tried to turn it on and it powered up, bringing me to the setup screen. There's not a lot of detail on the setup screen but the picture didn't have any distortions, so at least a cursory examination suggests no physical damage to the screen. The set appeared to be working normally, but it shut down after about 15 seconds,...
      02-18-2024, 09:11 AM
    • cruiser_
      A1466 820-00165 intermittent shutdown
      by cruiser_
      hi there,

      Got this macbook after liquid damage. Nothing major, cleaned and reflowed what was suspect. Now, the laptop turns on and boots up but shuts off intermittently - sometimes after a few minutes, sometimes after a few hours.
      Can be immediately started from keyboard right after. Plug stays orange during this time. No battery.

      Gives shutdown cause -128.

      Seem to work fine in SMC bypass.

      Same shutdown happens with disconnected TP/KB/KBLED/CAM.

      Observations:
      - SMC_RESET_L - when pulled down - plug goes orange/green and...
      10-11-2022, 12:06 PM
    • cajoeg
      Insignia NS-LCD019-09 issue: Power light turns blue for 3 seconds, the flashes red before going solid read again
      by cajoeg
      Hello, I'm new to the group and to trying to repair a LCD TV. During the past few years, I've been collecting/repairing/restoring vintage personal computers (Commodore, Apple II, Atari, TRS-80, Texas Instruments, and Timex Sinclair). This has been my retirement hobby. Now I've gotten interested in trying to repair a LCD TV that I have and used regularly when working on vintage computers.

      The LCD I'm working on is a Insignia NS-LCD019. I've downloaded the service manual that I could find, but it must be a different revision since not too many items in the service manual match the TV...
      02-10-2025, 04:01 PM
    • CraigR
      Hp x360 15-u499nr power light flashes continuously.
      by CraigR
      I have an Hp x360 15-u499nr laptop with a continuous white blinking power light. The laptop does turn on. The light flashes with just the battery and if I disconnect the battery and just use the power cord it still flashes and with both connected it still does. I have updated the bios and tried a hard reset with battery unplugged and power cord unplugged and holding down the power button for 60 seconds. I can't think of what else to try.
      09-16-2024, 06:12 PM
    • RATIM SIDDIQUE
      hp fpw50-la-h323p rev 1.0 automatic shutdown after 30 sec, need help
      by RATIM SIDDIQUE
      hp fpw50-la-h323p rev 1.0
      automatic shutdown after 30 sec of display coming
      do not shutdown without ramstick
      someone give me idea plz
      08-20-2024, 03:50 AM
    • Loading...
    • No more items.
    Working...