I have a Panasonic TC-P50U50 that has the 8 blinks of death/won't turn on. Thanks to the posts in this thread https://www.badcaps.net/forum/showthread.php?t=32594, I was able to determine that I've got an SS board that is bad, thanks to a loose screw at the top that was holding it on. Arcing marks all over the place.
My question to those of you out there that have dealt with this set: Is it worth spending the $170 for the TXNSS1SDUU/SS board from pstc.panasonic (as I can't seem to find anywhere else that sells these boards), or take it to a repair place and see if they can solder on the parts from the "Component Repair Kit"? I don't have the soldering skills that I think would be required to pull something like this off (diode/resistor/transistor) as posted in https://www.badcaps.net/forum/attach...1&d=1383032300 .
Thanks for reading this and any thoughts are appreciated.
My question to those of you out there that have dealt with this set: Is it worth spending the $170 for the TXNSS1SDUU/SS board from pstc.panasonic (as I can't seem to find anywhere else that sells these boards), or take it to a repair place and see if they can solder on the parts from the "Component Repair Kit"? I don't have the soldering skills that I think would be required to pull something like this off (diode/resistor/transistor) as posted in https://www.badcaps.net/forum/attach...1&d=1383032300 .
Thanks for reading this and any thoughts are appreciated.
Comment