Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Can you get a picture of what is under tool option 1-5 and check that your country group is set right.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
I was hoping for a reset option but there is not one there.
Since all inputs are dead it cannot be a single option in that list IMO, so not sure what to suggest, other than a new main board.
You always pick the hardest projects
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Just to check so each of those match for example you have 3 HDMI, a component input on the rear, 1 USB, side RCA port, etc.?
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
So it seems to match, it is probably a hardware fault then. Unfortunately it will all be integrated into one main processor so you have little choice when it comes to repair.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
I might be able to get hold of a faulty 32ld690 with a power supply issue. Anyone know if the main board is the same as in the 32ld490. I have had a look around and I think they are the same so it should fit.
Comment