Sanyo DP46848 Dark line

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • PeteTait
    Newer Member
    • Jan 2014
    • 41
    • United States
    #1

    Sanyo DP46848 Dark line

    So i picked up this TV with a cut power cord and no idea what was wrong with it. Fixed the power cord to find the Dark band across the top starting on the right hand side. It flickers and fades in and out and then stays dark.

    This is a new one to me and will take some investigating. Does anyone have any suggestions where to start?
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Rozp
      70LE660U dark cloud or black screen with sound.
      by Rozp
      Hello Everyone,

      This is my first post so I will try to be as precise as possible without making this post too long winded. Unfortunately I don't have pictures of the original problem but I included images of the TV internals.

      I have a Sharp 70LE660U. The problem started a few months ago with the bottom row looking out of sync and was dark on the left side and then fading to transparent on the right side. Shortly after, a dark cloud appeared in the center of the screen. The dark cloud started small and shaded but the image was visible. It also affected the menu area....
      08-29-2023, 05:25 PM
    • cubytus
      Samsung UN50TU8000FXZC shows thin horizontal green line when warm
      by cubytus
      Hi to all,

      I was given this TV, an entry-level 4K 50" set. Some have criticized its lack of contrast and relatively poor colour rendering, but for my needs, it's very decent.

      I reset everything to factory settings, but this line keeps on fading in and out when watching a streaming channel from the Tizen firmware. Interestingly, it only happens when TV is warm, after about 1h45 of it being turned on.

      Watching a movie from an external source doesn't trigger the line as easily (needs 2 hours), and from a normal viewing distance, is hardly noticeable. It...
      1 Photo
      01-10-2024, 01:26 AM
    • TrueSword88
      Kogan - KALED65XU9220STB - Blue Vertical Line
      by TrueSword88
      Hi all.

      I have a Kogan 65' LCD Panel with a thin blue vertical line (top to bottom) on left hand side of panel.
      The line just happens to coincide with the end of COF and start of the next COF (attached).

      The line is permanent no matter what I've tried. I've tried pressure testing the panel (top to bottom) and all over, I didn't notice any difference with the line, either temporary or semi-permanent.

      Also tried unplugging all flex cables, cleaned with isopropyl then re-inserting to no avail - line remains.


      Hoping to fix...
      05-05-2023, 04:28 PM
    • FALKLAN
      Running Line Voltage and Integrating LED Pods - Automotive
      by FALKLAN
      Howdy everyone! I hope all is well where ever you are!

      I'm attempting to integrate a couple of LED pods into an automotive reverse lamp circuit. The problem being, while the vehicle is running there is a 8.5v current present on the reverse lamp power wire. Needless to say is that all LED pods and lights dimly illuminate while the 8.5v is present, so the LEDs are always powered on while the vehicle is running. When the vehicle is shifted into reverse, the voltage changes to 12 volts.

      I am uncertain how to convert this line into a switched 12v output line for the LED pods....
      02-05-2025, 12:30 AM
    • mindoverflow
      ASUS GTX 1650 Gpu.Initialize Interrupt request line stuck asserted
      by mindoverflow
      hello,

      there is an asus gtx1650 which displays fine in windows but if i run a benchmark test it displays artifacts and the driver crashes after a second or two.

      I changed pads and thermal paste.

      I run mats test but it is reporting 0 errors.

      I then tried to run the mods version 400.271_1650 test, it first ran and stopped with a 'breakpoints limit reached after 5 retries' error and the fans went full speed.

      After a reboot, I tried to run the test again, but now the test fails and says "ERROR: Couldn't clear GPU's interrupt...
      02-09-2022, 03:22 PM
    • Loading...
    • No more items.
    Working...