Opinion on 2 tv's

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dcapper
    Badcaps Veteran
    • Dec 2013
    • 496
    • Canada

    #1

    Opinion on 2 tv's

    Thanks to everyone on this forum, I have successfully repaired about a dozen tv's.

    I recently repaired a Philips PDP 42X3 that only had one bad cap.
    I also repaired a Panasonic TC-P42X2 that I had to replace every board but the buffer boards and the P board.

    I am going to keep one for my cottage.

    I'm into the Philips about $50.00 and about $300 into the Panasonic.

    Both are 720p. Which one would you people keep?
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Opinion on 2 tv's

    Definitely the Panasonic... why did you replace every board?
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • dcapper
      Badcaps Veteran
      • Dec 2013
      • 496
      • Canada

      #3
      Re: Opinion on 2 tv's

      I think it was a graveyard tv, where they put dead boards in. I bought the SN and SS from Shopjimmy. and the mainboard from eBay. Would I be safe to keep it? I'm just worried since I replaced so many boards. It is a 600Hz tv unlike the Philips.

      Comment

      • tw2005
        Badcaps Legend
        • Oct 2011
        • 6458
        • Australia

        #4
        Re: Opinion on 2 tv's

        Originally posted by dcapper
        I think it was a graveyard tv, where they put dead boards in. I bought the SN and SS from Shopjimmy. and the mainboard from eBay. Would I be safe to keep it? I'm just worried since I replaced so many boards. It is a 600Hz tv unlike the Philips.
        The SS and SN are likely to be pretty new. Should get some good use out of it, gotta be better than the philips.

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #5
          Re: Opinion on 2 tv's

          All plasmas are 600Hz driven. Well the Philips might be 480Hz but either way you won't see the difference. Plasma TVs process sub-fields differently to LCD TVs.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • dcapper
            Badcaps Veteran
            • Dec 2013
            • 496
            • Canada

            #6
            Re: Opinion on 2 tv's

            Learned something new. Thank you. Does a panel take a beating when all the boards driving it blow? That's why I'm concerned about the Panasonic.
            Last edited by dcapper; 04-09-2014, 07:55 AM.

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK

              #7
              Re: Opinion on 2 tv's

              Shouldn't do, the panels are basically glass and metal electrodes.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

              • tw2005
                Badcaps Legend
                • Oct 2011
                • 6458
                • Australia

                #8
                Re: Opinion on 2 tv's

                Originally posted by dcapper
                Learned something new. Thank you. Does a panel take a beating when all the boards driving it blow? That's why I'm concerned about the Panasonic.
                Both mine are rebirthed with SC boards, admittedly just the one was shorted. 1.5 and 2 yrs on both still great. they only had 2 -2500hrs on them when I got them.

                Comment

                • dcapper
                  Badcaps Veteran
                  • Dec 2013
                  • 496
                  • Canada

                  #9
                  Re: Opinion on 2 tv's

                  Originally posted by tw2005
                  Both mine are rebirthed with SC boards, admittedly just the one was shorted. 1.5 and 2 yrs on both still great. they only had 2 -2500hrs on them when I got them.
                  Awesome! I guess I'm keeping the Panasonic.

                  Comment

                  • tw2005
                    Badcaps Legend
                    • Oct 2011
                    • 6458
                    • Australia

                    #10
                    Re: Opinion on 2 tv's

                    Originally posted by dcapper
                    Awesome! I guess I'm keeping the Panasonic.
                    Having one more crack at my 42X20, same as yours. Just scored SN/SS/C1/C2 boards at a good price.

                    If it's still no good after that then that's it.

                    Comment

                    • dcapper
                      Badcaps Veteran
                      • Dec 2013
                      • 496
                      • Canada

                      #11
                      Re: Opinion on 2 tv's

                      Originally posted by tw2005
                      Having one more crack at my 42X20, same as yours. Just scored SN/SS/C1/C2 boards at a good price.

                      If it's still no good after that then that's it.
                      So what have you replaced on that one? You were having the same troubles as I did. I thought I wouldn't get mine working because of the wrong A board.

                      Comment

                      • tw2005
                        Badcaps Legend
                        • Oct 2011
                        • 6458
                        • Australia

                        #12
                        Re: Opinion on 2 tv's

                        if i was in the US market it would be easy but Australian A boards are pretty unique.

                        I'd say your A board is not the same one but is the right one, just slightly different features so it was always going to work really. it was all the other surprises I was worried about and you did not disaapoint there either.

                        Does make me wonder if these are a little tempermental when something fails.

                        Mine is a mess really, repaired SS with just the IGBTs, then A board was dead 1 blinker,got a NZ board and rechipped it from my old one.

                        Kind of disappointed i did not know the 1 blink was a single eeprom bad but that's the way it went.

                        somehow blew a DG501 IGBT in the ERC cct on the SN, still not going at this point either, then took a pot shot at the C board and found a buffer IC on that shot, running but picture just maldischarged and I get vertical white band on the C buffer i touched, give it a tap and that goes.
                        Corroded ribbon between the SN and A.
                        Plus it had 8000hrs on it so really my worst Panasonic for a fixer. very high humidity here and who knows what happened to it.

                        Only having a nother go because i have nothing else to work on and seeing yours running, I'm hoping that if i replace all the pnel boards I might get lucky.

                        Anyway should be able to sell the boards if no joy, waste of a panel though if i fail.

                        since plasmas are gone, I'll keep it just in case if I fix it.

                        So essentially all boards except PSU, A board will have a question mark since it was something i attacked and a miracle it still works to turn it on.

                        Comment

                        Related Topics

                        Collapse

                        • Andre Gilbert
                          Panasonic TC-P55ST50 8 blinks then no blinks
                          by Andre Gilbert
                          Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
                          Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

                          TV Model: Panasonic TC-P55ST50
                          ...
                          11-20-2024, 08:52 PM
                        • G33RT
                          Philips 8200 series 65PUS8204/12 stuck at Philips Logo
                          by G33RT
                          Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

                          It does power up when pressing the power button.

                          I already try the power button while plugin the plug with no result.
                          Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

                          Could this be an PSU or eMMC issue ?
                          07-19-2025, 03:43 AM
                        • stecos
                          Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
                          by stecos
                          Hi everyone!
                          I happened several times, in the search for help from the web, to consult this very interesting forum.
                          So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

                          Having said that I come to the gist of my post on the forum as the title suggests.
                          For my passion for technology I'm now collecting several...
                          11-28-2022, 11:39 AM
                        • AquaMan Ua
                          Problem with PANASONIC CF53 laptop after changing BIOS settings
                          by AquaMan Ua
                          Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
                          05-17-2025, 09:40 AM
                        • janos6662000
                          Philips 47PFS7509/12 LCD TV problem
                          by janos6662000
                          Hi

                          I have here a Philips 47PFS7509/12 LCD TV which came to me with a weird problem : without signal i could access menu, make a factory reset, access menus, etc.
                          When i applied cable signal to check image, i had normal picture, but TV was restarting.
                          I downloaded original firmware and applied the update, but the problem remained.
                          From a colleague i received a "factory package software" which is a lot bigger.
                          I made another firmware update, but still did not solve the problem.
                          Somewhere on the way the error got worse, because at the moment the...
                          Yesterday, 12:54 PM
                        • Loading...
                        • No more items.
                        Working...