Re: Samsung LE40R87BD
It could still be bad, but a good portion of it is working. I'd focus on the main board for now.
It could still be bad, but a good portion of it is working. I'd focus on the main board for now.
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: Samsung LE40R87BD
Do you think changing IC1803 for 24C256. Would be next stage to go ?Comment
-
Re: Samsung LE40R87BD
I would try that before anything else.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Samsung LE40R87BD
Hi All
I am still having problems with this set I have replaced the ic 1830 as suggested for a blank 24c256 but still same faults (sound but no picture ) and the set still starts to switch its self off/on continually after 5 mins.
I will include a couple of pict of the 24c256 hoping some one can confirm pin one where I am pointing with a arrow.
Any more help would be much appreciated with this set.
Ron
[/ATTACH]Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Re: Samsung LE40R87BD
Change the main board, I've had a couple that have cut out after a few minutes of being on, no guarantees of course but it is what I would try next, good luck.Comment
-
Re: Samsung LE40R87BD
Hi Dang
Thanks for your reply , when you say change the main board do you mean the power/supply board or the board with all the scarts,tuner and other connections on it ?
Thanks RonComment
-
Re: Samsung LE40R87BD
the main board is the one with the tuner and scarts on it.Comment
-
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.
Problem
TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode... -
I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... -
Hello all,
This is my first post, but long term lurker on the form learning as much as possible about these TV's. I was given this TV as due to a power outage of constant On/off of power to TV. The TV originally would just click on and off (Typical Reboot Cycle). I opened the back of the TV, and troubleshooted by taking the 96 pin LVDS off one at a time to see if I had a picture on either side. I finally fixed the reboot cycle by finding the error on the left side of the screen off connector CN 1301, and the TV would stay on. Further troubleshooting led me to the driver boards where...
Comment