Panasonic TH-50PX8EA Black screen, only relay clicks

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rensiee
    New Member
    • Jun 2024
    • 2
    • Netherlands
    #1

    Panasonic TH-50PX8EA Black screen, only relay clicks

    Hello,
    I have been reading a few threads on here regarding Panasonic plasma tv's. I've found one thread which explains the same problem as mine, unfortunately the thread has not been completed.
    I got a free tv (TH-50PX8EA) from a friend which shows no screen. When plugged in only one red light shows up and when pushing the ON button, the red LED turns of and will only turn on again when pressing the ON button again.

    When plugging in the TV i hear two relays click fast and after a few seconds the third relay clicks.
    I have measured the voltage in the VSUS line, which shows around 1 V and goes up to around 2 V, but won't go any higher.

    I do not have a lot of experience with TV boards, so I will not know everything about the TV I am afraid.

    Could someone help me with this?
    The link to the old thread is as follows: https://www.badcaps.net/forum/troubl...ck-no-blinking

    Thank you in advance
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Ryan.man
      Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
      by Ryan.man
      Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

      My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

      This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
      02-04-2025, 12:23 PM
    • Chrissygizmo
      Panasonic TX-48CX350B backlights but white screen , blank screen
      by Chrissygizmo
      Hi all, I’ve got a problem I hope someone can help me fixi.
      I have a Panasonic TX-48CX350B tv , it powers up ok but the screen is blank, the backlights are working, there’s nothing else though, no picture or sound. I’m not sure what the fault is called whether it’s BLANK/ BLACK/ or WHITE SCREEN I’ve actually came across this before on a similar tv but just ended up scrapping it, I will upload pictures of the boards etc , if anyone could help me I would really appreciate it...
      01-11-2025, 03:18 PM
    • thstuff
      Sony OLED XR-77A80J - Initially dead, now 4 Flashes
      by thstuff
      A) TV initially dead
      B) On a hunch of a locked up Google OS, plugged in a USB memory stick with latest FW and plugged it in. It booted into the update screen, completed the update and restarted to Home screen.
      C) Was able to perform a Reset from Settings menu and completed out of box configuration.
      D) Ran a 4K screen saver demo for about 6 hours, then turned it off for the day. Did not notice any stripes, dead zones or other artifacts in the image.
      E) Powered back on and it now runs for a few minutes before relay clicks, screen goes blank, Main Board Red Digital Optical...
      12-26-2024, 09:10 PM
    • smic717394
      iphone XS turns off when press on screen.
      by smic717394
      Hi,

      I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
      07-25-2024, 10:16 AM
    • Zelek11
      Panasonic Plasma screen interference on left half of screen
      by Zelek11
      My Panasonic Plasma model P55VT50 has started displaying "interference" on just the left half of the screen only (left when facing the screen). Sometimes it's concentrated in about the first 30 seconds after startup, then disappears. Other times it's fine at startup and then randomly does it later on. When it flashes the interference it's very quick and doesn't stay on the screen unless it flashes repeatedly in a row.



      This image is a screen shot from a video I took. This is an example of the interference at its worst. Often the interference is much smaller...
      10-14-2022, 04:54 PM
    • Loading...
    • No more items.
    Working...