Thinking of buying a tech special plasma. There's a horizontal defect going across the lower half of the display. Possible Y buffer, or whatever Panasonic calls it? lol.
Thanks,
Brian
Thanks,
Brian
Attached Files
-
-
Re: Panasonic TC-P46C2 Horizontal Defect
I would agree as there was a picture in training manual with that fault which was A board IIRCPlease do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic TC-P46C2 Horizontal Defect
Ok....maybe I'll pass on this one, unless i can get it cheap. The A boards for the panasonics are over $100 US. The guy is firm on his selling price too. Thanks everyone.Comment
-
Re: Panasonic TC-P46C2 Horizontal Defect
Yeah it's only a 720p TV too.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
MODEL JVC LT-58VA6955
MAIN 17mb170
PENAL ves580qndp-2d-n42
T-Con CCPD-TC575-009 V1.0
PSU 17ips72
There are no horizontal stripes (see photo). There is a sound of moving through the menu! Maybe someone has encountered such malfunctions?
β08-07-2024, 08:11 AM -
Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing hereπ€?
Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting π.
TV Model: Panasonic TC-P55ST50
...11-20-2024, 08:52 PM -
Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in... -
Hi guys
I just started fixing 4k TV few months ago. so I am still learning a lot
I got this tv from friend complaint is ghosting or horizontal lines on image.
never saw the original symptom but I took the tv back home. the funny part is that after bringing to home, the tv worked fine no issue for 3 weeks.
then it started to show the ghosting white image.
I started using the tape method, but this tv does not have a T con board and it has only 1 ribbon cable from main board to the tv panel.
it has 3 thin small boards at the bottom of the... -
I have a 2011 Panasonic Plasma HD 3D Viera model notorious for the SC board failure. As per a Google for the dreaded 14 blink code I discovered from info on this forum about isolating suspect boards by disconnecting the power cables and using an ohmmeter on the power terminals and this led me to the SC board. I had it repaired by a nearby technician who replaced the shorted transistors and before I got the board back I wondered if any of the buffer boards are damaged and a YouTube showed how to test these by using the ohmmeter and removing the copper colored ribbon cables to the display and use...
Comment