Westinghouse SK-32H240S trouble

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Twins_Guy
    Member
    • Feb 2014
    • 28
    • United States
    #1

    Westinghouse SK-32H240S trouble

    Hello I am new to forum and the tv fixing and have been doing some reading about the Westinghouse SK-32H240S and having the "w" come on then go out after a few seconds. if I leave it on it turns to orange. I have taken the board off and I see no obvious signs of a problem? could there be a blow cap without the top being pushed. here are some pics of the board.
    Attached Files
    Tags: None
    • ecking767
      Badcaps Veteran
      • Oct 2009
      • 492
      • USA
      #2
      Re: Westinghouse SK-32H240S trouble

      I would start by replacing all caps (except for the large one). The caps on your power supply are not a good brand

        Comment

        • selldoor
          Slow Learner
          • Dec 2010
          • 7870
          #3
          Re: Westinghouse SK-32H240S trouble

          You need to replace with good quality caps panasonic fr fm or fc or nichicon or rubycon equivalents bought from a good supplier. Caps from radioshack are not suitable for this purpose and there are many fakes on ebay.
          Please upload pictures using attachment function when ask for help on the repair
          http://www.badcaps.net/forum/showthread.php?t=39740

            Comment

            Previous template Next

            Related Topics

            Collapse
            • socketa
              Bestec ATX0300F5WA - fast,or slow blow, fuse?
              by socketa
              I bought a dead motherboard, and connected it to this PSU,
              Was checking the standby voltages on the motherboard, and, whilst doing so, the PSU made a loud bang with a flash of light.
              So now i truly got a bang for my bucks, and something else to try and fix.
              The fuse was blowen, and the top was blowen off of a TNY276PN chip
              The glass fuse didn't have any marking to say if it was fast or slow blow
              So i checked the marking on the PCB thinking that that would tell me,
              but it 's got a T/F8A printed on the board
              So should i get a fast blow fuse, or should...
              05-17-2022, 01:22 AM
            • ohren
              Why did my MOSFET blow up?
              by ohren
              I had a switching transistor and PWM IC blow up as part of a repair, where a big chunk of each went missing. Now I would like to understand the likely turn of events, and maybe determine if I did something stupid. If nothing else, I should at least extract some lessons from it.

              "IC10" can be found on page 169 in the service manual:

              https://www.manualslib.com/download/...n-Mas-101.html

              The entirety of the repair is basically:

              1. Device doesn't power on (IC10 supply voltage unstable)
              2. Replaced C18 and C66
              3. Device works...
              04-30-2023, 06:59 AM
            • Nicktronic
              Westinghouse W55UW4620 No Video
              by Nicktronic
              Ok, so I know I know, it's a Westinghouse....lol It's got the backlights but no video. Likely the panel, but I'd like to take some measurements on the buffer board with help from you experts to confirm. See the attached pictures. In pic #1, there's a nice pin reference to use to take some measurements. The large IC in pic #7 gets up to 60degC when the TV is on.

              So, backlights, no video, go! 🙂...
              06-03-2024, 03:21 PM
            • EBW
              Help Request - Westinghouse 32" Smart TV (Model: WD32HBR105)
              by EBW
              Westinghouse 32" Smart TV (Model: WD32HBR105) . Originally stuck on logo with no response from remote and no firmware file available to flash via USB. Westinghouse Support stated it would require service but that wasn't a cost effective option. I used dental floss to remove the motherboard processor heatsink to identify what make it was (Mstar). Unfortunately that knowledge didn't help with a solution. After the heatsink removal it only displayed a completely white screen. I then decided to replace the motherboard with a universal 3-in-1 board but the white screen problem continued. This...
              10-27-2022, 06:32 PM
            • Seville
              Westinghouse TV WD48FAB100 Not Powering On – Burn Mark Found on Power Supply
              by Seville
              Hello all!

              Westinghouse TV WD48FAB100 Not Powering On – Burn Mark Found on Power Supply .

              I have a Westinghouse LED TV, model WD48FAB100 that is not powering on. Upon removing the back cover, I noticed a burn mark where the AC cord connects to the power supply/main board. In this model, there is only one board combining the two functions. Previous owner said the TV experienced a lightening strike, but who knows. I checked the main fuse, tested OK. Here are a collection of readings from the power supply ports. Looking for some guidance on what to test/check next....
              10-10-2022, 07:31 AM
            • Loading...
            • No more items.
            Working...