JVC LT40X887 BOOBYTRAP'd HDMI Reset Needed

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Coshelectronics
    New Member
    • Aug 2013
    • 6
    • usa
    #1

    JVC LT40X887 BOOBYTRAP'd HDMI Reset Needed

    Here's a quick rundown, I've done tons of research on this but haven't found the answer I need yet. So I put it to you guys to see if you may have an answer for me.

    I have a JVC LT40X887 TV that had an issue with the power supply and needed the transformer reflowed. So unfortunately I tested it with the back off, and you guessed it. I was booby'd. So now of course every thing is all buttoned up and the TV is fixed but, you guessed it, HDMI's aren't working. So I researched and found I need to reset the hdmi's via self check in the service menu. Only problem is I don't have the original remote.

    So my questions:
    Do I have to have the original remote to access the service menu or can this be done via the button on the tv
    Or is there a way to reset this via jumpering pins on the board itself.

    Any help will be greatly appreciated, thanks in advance.
    Last edited by Coshelectronics; 02-13-2014, 01:54 PM. Reason: spelling
    Tags: None
    • RON_CET
      Badcaps Veteran
      • Jun 2012
      • 217
      • USA
      #2
      Re: JVC LT40X887 BOOBYTRAP'd HDMI Reset Needed

      Yes you will need the Original JVC remote attached is the procedure
      Attached Files
      Ron Driver,BSEE,CET,ISCET,NESDA

        Comment

        • Coshelectronics
          New Member
          • Aug 2013
          • 6
          • usa
          #3
          Re: JVC LT40X887 BOOBYTRAP'd HDMI Reset Needed

          Ok thank you, was afraid of that. Guess I'll have to find an oem remote

            Comment

            Previous template Next

            Related Topics

            Collapse
            • cstout
              DeLonghi AC Remote only accepts 3V
              by cstout
              Hello all, I've been looking into this portable air conditioner's remote control and can't find what could be causing the problem - or possibly this remote is just terribly designed.

              The remote only works at exactly 3V - if I drop it any lower, using my bench power supply, to say, 2.9V then the remote will not flash the display and turn off. I don't have any AAA batteries that are exactly 1.5V each so I'm not sure if this remote is designed this way - to only use the freshest possible batteries, or if there's a failed component in the mix.

              I can't find any schematics...
              06-03-2024, 03:53 PM
            • jemnis
              Lenovo x1 carbon DX120 NM-B141 rev 1.0 Bios RESET PASSWORD Needed
              by jemnis
              I NEED CLEAN BIOS
              P/L/:SL10P9806
              02-25-2024, 07:55 AM
            • Mc_Millian
              Toshiba 50lf711u20 fire tv remote not pairing
              by Mc_Millian
              Hello everyone,

              I was wondering if anyone could help my in pairing a remote with a Toshiba fire tv?
              The Tv model number is: 50lf711u20 Rev B.


              I've already replaced all the the circuit boards within the tv along with the I.R. sensor receiver.

              I've tried 3 different remotes which should be fully compatible with this TV.


              Oddly enough. A few if the buttons on all of the remotes actually work. Even without pairing...which makes no sense.

              The power button, along with the volume,back,select, and directional...
              04-07-2022, 12:15 PM
            • Chrissygizmo
              Panasonic tx-40cx400b universal remote code needed
              by Chrissygizmo
              Hi all

              Just a quick question...

              Does anyone know the actual "ONE FOR ALL" universal remote code for a Panasonic TX-40CX400B?

              I have downloaded the manual for it but the tv doesn't do anything. I can get it to power off when using some of the codes but no other buttons work , it won't even turn back on with the remote unless it's immediately after switching off 🤯 ...

              Thanks...
              08-29-2021, 08:02 PM
            • tmhobadcap
              Pioneer VSX-522-K remote control not working???
              by tmhobadcap
              I have this receiver for at least 10 years. Usually, we just use the remote for turning on/off and adjusting the volume. Recently, the remote control started not able to turn the receiver on. Later, the volume also could not be adjusted by the remote control.

              At first, I thought that it was the usual problem which can be fixed by cleaning the contacts on the switches and the pcb. I opened the remote and clean it with alcohol. The remote did work again after that. But after one day, it did not work again. I opened it again and clean with alcohol and contact cleaner. Again it worked...
              12-24-2020, 01:44 AM
            • Loading...
            • No more items.
            Working...