LCD32762HDF lcd tv "crashing"

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • charlierfc
    Senior Member
    • Mar 2013
    • 93
    • scotland
    #1

    LCD32762HDF lcd tv "crashing"

    hi all, ok i have the above tv. i had it for a while.
    The problem with this one is the tv powers on ok (after i replaced the psb) but now im having a fault where after the set is on for a min or so the tv crashes so the keys at the side can not be used, apart from the volume keys.

    if left on the tv gets worse till the backlight flickers off.
    the readings i get from psb look fine,maybe high esr?

    or am i looking at main board fault?

    any help please?

    regards charlie
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Rictech
      Panasonic SA-MAX770PU SMPSU board fault....
      by Rictech
      Hello everyone. 😀

      As per thread title, this unit has a serious SMPSU fault. It blows F1001, which is a 10A M205 in the phase from the mains input.
      Very first thing I tried, was simply replacing the fuse, but the replacement ceramic fuse blew immediately.

      Looking at the schematic for this PSU, I then removed what I thought was the next likely candidate: D1001 - the HV main bridge rectifier.
      This isolated the fault(no longer blows the main fuse), but does not point me to the actual fault.
      There are no devices that have exploded or otherwise show signs...
      08-26-2024, 01:05 AM
    • howardc64
      Samsung QN75Q6FNA backlight no display, red LED blink 2x, fault in panel
      by howardc64
      • Prior owner tried a replacement main board. No difference.
      • Samsung 2x red blinking standby LED = panel fault
      • Jumpered FB_TRDY_1 (pin 1 CN1300 left. main tcon->left side buffer boards) and FB_TRDY_3 (pin 95 CN1301 right. main tcon->right side buffer boards) This allows testing individual T-Con (on main board) connection to panel on this Samsung. Found fault on left side (viewing from rear of TV)
      • Each side has 2 buffer boards, disconnected left side flex between 2 buffer boards. Fault is on the left most board.
      • Tape masking eventually isolated to CN1300 pin 15 (CKV4_GOA) Display
      ...
      07-19-2025, 10:54 PM
    • sam_sam_sam
      ESR meter came to the rescue again today with a PLC I/O card fault
      by sam_sam_sam
      I have been having a fun time at work with two pieces of equipment that had shorted components or shorted component cables to machine frame
      I would check what my multi meter was telling me about how many ohms I getting with the multi meter was telling versus the ESR was telling me about weather or not it really was a short to machine ground or not

      One note at first we thought that it might be a bad I/O card or a malfunction PLC including me as well but I thought I would try and see if removing the I/O cables would make a difference or not and this time it did make a difference...
      12-18-2023, 08:17 PM
    • 6BW6
      Win7 Performance test stops
      by 6BW6
      I had a dodgy Molex Sata lead go bad that cause crashes once in a while, after repairing all is well with no crashing BUT.... Windows performance test stops. I get-:

      Problem signature:
      Problem Event Name: APPCRASH
      Application Name: WinSAT.exe
      Application Version: 6.1.7601.17514
      Application Timestamp: 4ce798fc
      Fault Module Name: atiuxp64.dll
      Fault Module Version: 8.14.1.6463
      Fault Module Timestamp: 56254af6
      Exception Code: c0000005
      Exception Offset: 000000000000dc14
      OS Version: 6.1.7601.2.1.0.256.48...
      05-29-2023, 04:21 PM
    • EvazX
      ASUS ROG G513QY – RX 6800M powered but not detected intermittently + random crashes (Motherboard: 6050A3254002-MB-Axx)
      by EvazX
      Hello everyone,

      I am working on an ASUS ROG G513QY laptop with RX 6800M dGPU.
      Originally, this laptop was completely non-functional. I replaced the motherboard (part number 6050A3254002-MB-Axx), and with the replacement board it started working fine.

      For a long time, the dGPU worked perfectly stable. I played several hundred hours on very demanding games such as Cyberpunk 2077 without any crashes, instability, or detection issues. Performance was excellent and there were no warning signs of failure.

      However, after some time, the replacement motherboard...
      08-25-2025, 06:09 PM
    • Loading...
    • No more items.
    Working...