Bad panel or T-con maybe ?
The lines on the top half running vertically through the picture make me think bad panel.
The lines on the top half running vertically through the picture make me think bad panel.
Attached Files
-
Last edited by mmartell; 12-29-2013, 09:58 PM. -
Re: Bad Panel ?
That is most certainly a bad panel. It's liquid bleed. Also happens upon extreme pressure hitting the panel without breaking it. Seen it before.Did I leave the soldering iron on? -
Re: Bad Panel ?
Oddly enough though if it were bleeding it.would run further than center point. That is really a strange one. I'm still tthinking panel but hey if it's cheap enough you might consider.putting a tcon in to see if it cures it.Did I leave the soldering iron on?Comment
-
Re: Bad Panel ?
No can do as I don't own it. It's on ebay and it's not cheap but it is "cheaper" than usual as it's a Series 8 Samsung.Comment
-
Re: Bad Panel ?
Looks like a digital processing failure but couldn't rule out some water damage to panel given the lines.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
Comment