Announcement

Collapse
No announcement yet.

Samsung plasma screen not centered

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #41
    Re: Samsung plasma screen not centered

    Originally posted by Dxmen2
    I have a 42 inch plasma used a main board from a 50 inch same part number but pic is not centerd
    From reading this thread, consensus is no it won't work, you end up with what you have and you need to get the version that suits the correct panel size or work out what the differences are and swap those bits across eg firmware loaded on EEPROMs but if the firmware was the original fault it will carry across the fault.

    Get the correct board would be the safest option.

    Comment


      #42
      Re: Samsung plasma screen not centered

      Not possible to use a 50" mainboard in 42" set.

      In some cases, cant even use a 42" in another 42" set--like a LG 42PC1DA into a LG42PC1DV Damned sets even Look identical except slight difference in SUS ER coils and coarser 'grid' of panel....
      Screen Resolution of DA is 720 and DV is 480, you get small 30" picture in top left-hand corner!
      Haha Ask me how I know!
      TELEFIX

      How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
      http://www.irf.com/technical-info/appnotes/an-1088.pdf
      PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

      Comment

      Working...