Re: LG Plasma 60pk950-UA no picture or sound
No
-
-
Leave a comment:
-
Re: LG Plasma 60pk950-UA no picture or sound
I was just looking at the photos and in the 3rd picture I see a few bent caps on the primary circuit. I'm no pro, but isn't that a sign of a bad cap? I just figured I'd say something cause I want to know if they are (possibly) bad.
I'll wait for a veteran to speak up. I just wanted to point and ask...Leave a comment:
-
Re: LG Plasma 60pk950-UA no picture or sound
Does the screen glow in a darkened room?Leave a comment:
-
LG Plasma 60pk950-UA no picture or sound
I am looking for some help troubleshooting an LG 60pk950-UA plasma television. When I took the back cover off I also found this number PDP60R10000. TV powers up but no picture or sound. We didn't use the tv for almost a year and when I went to turn it on yesterday it powered on but no sound or picture. In the past it acted up a couple times(had sound and no picture or picture and no sound, cant remember which one it was) I assumed it was the LG wireless media box. If you power cycled the tv then it would work. Now I have no sound or picture. Any help would be greatly appreciated. I have attached pictures of the boards.Attached Files -
-
Picked up a bahemoth plasma TV not too long ago and just now getting around to looking at it.
No picture but you hear the TV static (white noise) playing loud and clear.
The back was already taken off (and no screws were provided) as the previous owner had already taken a look.
But it seems they didn't get too far and just left it.
When I first took a look I was amazed at how pristine the inside looked.
Its as if the TV had been in a time capsule.
Caps looked like they were just pulled off the self.
Copper coils had no sign of corrosion on... -
Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... -
Hello everyone,
Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
Anyway I still fully expect that there has been something seriously damaged... -
Hi all
I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.
Symptom:
No picture no sound.
When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
No sound at all.
What I tried:
1. I tried unplugging the left or right ribbon...
Leave a comment: