mosfets i can use help please

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wreksta
    Badcaps Veteran
    • Aug 2013
    • 508
    • england
    #1

    mosfets i can use help please

    hi I have a 42pq3000 com in with blown n channel mosferts 4 of them and 2 irgps I have new ones of these but I need help with the 4 blown smaller mosfets

    the mosfets in the board that are blown are these

    30j124

    these are what I have to use at the moment can anyone tell me if they suitable

    rf2001 t3d840

    fdpf51n25

    k3667

    rjp4584

    are these ok to use
    Last edited by wreksta; 11-23-2013, 04:57 PM.
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: mosfets i can use help please

      The 30J124 is an IGBT, so must be substituted with an IGBT not a MOSFET (different type of component.)
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • munirutech
          Senior Member
          • Oct 2013
          • 72
          • Ghana
          #3
          Re: mosfets i can use help please

          if you can get 30j121 will be best subtitute

            Comment

            • wreksta
              Badcaps Veteran
              • Aug 2013
              • 508
              • england
              #4
              Re: mosfets i can use help please

              I can probably get 30g124 wil that be any good

                Comment

                • wreksta
                  Badcaps Veteran
                  • Aug 2013
                  • 508
                  • england
                  #5
                  Re: mosfets i can use help please

                  30g124 is an igbt so just need clarification

                    Comment

                    • tom66
                      EVs Rule
                      • Apr 2011
                      • 32560
                      • UK
                      #6
                      Re: mosfets i can use help please

                      No idea on that being a sub, but remember if you replace that it's a good idea to replace the driver IC it's attached to (follow the gate pin), or you may blow you new IGBT up again.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • DarksiderX
                          MSI GTX 770 TwinFrozr 2GB with some blown up mosfets
                          by DarksiderX
                          hello and thank you for checking this post, my friend had this graphics card was working just fine till a thunderstorm hit, got some mosfets blown up as shown in the pictures below.
                          still trying to get the right name of these components so i can order them and try to replace them on hopes that it can be fixed (hopefully the GPU is still intact)
                          if anyone here has the schematics for this exact card please feel free to send me the file or if you ever had a similar issue i would love it if you can provide some feedback (i am not a professional repairman, just trying to my best to...
                          05-22-2022, 10:03 AM
                        • BlackScreen_22
                          Harman Kardon sub TS11 (ds15 amplifer) blows fuse and mosfets
                          by BlackScreen_22
                          Hi, I'll start by saying that I'm not an expert and I've reached a point where I don't know what to try/do anymore...
                          Starting from the beginning: I opened this subwoofer for the first time with a very strong smell of burnt electrical components, I realize that on the amplifier board there is a hole between V+ OUT and GND about the size of a finger, the damaged components were the shorted mosfets, two damaged zener diodes and two capacitors. I bought everything, I fixed the hole by cutting the pcb and putting a piece of a perforated board.
                          I had no problems connecting mosfets and capacitors,...
                          08-27-2024, 12:46 PM
                        • TigerVieH
                          EVGA GTX 980? EVGA141 Rev. 1.0 2 blown mosfets
                          by TigerVieH
                          Hey everyone,

                          is there someone who can help me with the EVGA GTX 980?
                          EVGA141 Rev. 1.0

                          2 blown mosfets and the connectors needs to be done new.

                          Thanks in advance for your time and help!

                          Greez,
                          TigerVieH
                          01-19-2022, 04:42 PM
                        • kotel studios
                          Intel D865PERL - no Vcore after replacing MOSFETs and MOSFET drivers
                          by kotel studios
                          Hi,

                          Finally got time to fix this board up.
                          At first it didn't give any POST codes. Turns out it was an unsupported Celeron D cpu. After dropping in an Celery 2.6gHz the CPU came out of reset with clock signal, but still no post codes. For a while it did work when I applied pressure to the ADP3168 chip, but on next reboot the MOSFETs started to burn. Then I left it as is for months.

                          Now I came back prepared. Replaced the bad MOSFETs and the ADPxx18k drivers. Now I don't get any MOSFETs blowing up issues anymore. But sadly, the Vcore is missing. The whole VRM isn't...
                          04-22-2025, 05:08 AM
                        • DrDos
                          kenwood kr-6030 Mosfets?????
                          by DrDos
                          Hello everyone, I have decided to try and replace the mosfets in my power amp (the one with relay and left and right sides) on my kenwood kr-6030. I'm trying to get the A side of my speakers working. I have replaced all the caps in the power board and I thought why not change the mosfets. They seem to be working since I have great music coming out of the B side speakers and since I am not an electronic guru (but I am learning) I don't want to make any mistakes. The mosfets I have are listed A913 so I guess 2sa913 and 2sc1913. Can't really find those in mouser or digikey at least with the info...
                          09-20-2025, 04:42 PM
                        • Loading...
                        • No more items.
                        Working...