Panasonic TH-46PZ85

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • PowerAmpFreak
    Badcaps Veteran
    • Feb 2010
    • 982
    • Sweden
    #1

    Panasonic TH-46PZ85

    Howdy!

    Panasonic HD plasma TH-46PZ85 which goes into protection mode directly after mains connection. Service manual available at:



    Service manual tells that 10 led flashes means a failure in mainboard.
    SUB 5V, main 3V3, DTV 9V, Tuner power down.
    I would guess a major fault in the DC/DC section, not finding anything though.
    Standby supply generates a stable +5V and the rest is shut down.
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Panasonic TH-46PZ85

      See:
      http://www.youtube.com/watch?v=LjpGKaBt8hg
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • PowerAmpFreak
          Badcaps Veteran
          • Feb 2010
          • 982
          • Sweden
          #3
          Re: Panasonic TH-46PZ85

          Great info. I was focused on the mainboard since the SM pointed so. Thanks as always Tom!

            Comment

            Previous template Next

            Related Topics

            Collapse
            • SACR
              Panasonic Plasma TH-P42X28K A-Board @ Mainboard Schematic needed
              by SACR
              I need Schematic A-Board @ Mainboard for Panasonic Plasma TH-P42X28K. Code : TNPH0842. I want to replace 1 MLCC but I don't know values (capacitance & voltage) & codes. Can someone help me? Thank you...
              11-20-2023, 11:53 PM
            • Andre Gilbert
              Panasonic TC-P55ST50 8 blinks then no blinks
              by Andre Gilbert
              Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
              Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

              TV Model: Panasonic TC-P55ST50
              ...
              1 Photo
              11-20-2024, 08:52 PM
            • Mirenia
              Dell Latitude 7420 - Touchscreen not working since Mainboard replacement
              by Mirenia
              Hi everyone,

              I've got a little "problem child": my Dell Latitude 7420 2-in-1, which had a faulty mainboard.
              I replaced it, but ever since, the touchscreen no longer works — and honestly, I’m running out of ideas…

              In Windows Device Manager, I just see an I2C HID Device with error code 10. Sporadically, the touchscreen is recognized correctly for just a few seconds, but I haven’t been able to determine under which circumstances this happens.

              The touchscreen also doesn’t work in UEFI/BIOS, although it’s enabled...
              03-30-2025, 06:47 AM
            • orcic
              MASTER TL240 and new mainboard LW36BKC01
              by orcic
              Hello,
              I have an old MASTER TL-240 LED TV. Since it stopped working and it had a DVB-T receiver that is being dismissed in Italy, I've decided to replace the mainboard with a DVB-T2 one.
              The original problem was that when switching on the TV, the power LED was transitioning from red to steady blue, without showing video or audio.
              After checking some voltages on the power supply board (HKL-240101-B Rev. 1.4, HKL from now on) someone suggested me to replace the mainboard.
              Now I have some doubts about how to connect the new mainboard to the old power supply.
              First of...
              05-12-2023, 08:10 AM
            • TheMG
              Panasonic TC-P65S1 mainboard
              by TheMG
              Background:

              This TV has a weird fault where there is signal corruption on all the HDMI inputs, when running at 1080p 60Hz (which is a supported mode). I've tried many different cables and even different sources, with no difference. Running at lower resolution or refresh rate there is no problem at all.

              The corruption presents itself as the signal occasionally going black, sometimes going all blocky, but sometimes is very subtle and presents itself as stray pixels flashing randomly on the image.

              As the mainboard warms up, the corruption becomes less...
              11-05-2020, 11:20 AM
            • Loading...
            • No more items.
            Working...