Sharp LC-32SH20U 1/3 picture

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 120volts
    Senior Member
    • Oct 2013
    • 57
    • USA
    #1

    Sharp LC-32SH20U 1/3 picture

    Here's a good one.
    I was going to post a help question.
    I picked this TV up this morning, I checked for insects.
    When I plugged it in I got 1/3 picture
    1st. thing I tried was re-seating two ribbon cables.
    Wow, the best kind of fix, NO parts cost .


    Dan "TV Tinkerer"
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Sharp LC-32SH20U 1/3 picture

      I would have immediately feared bad panel, nice that it turned out only to be a loose ribbon.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Tr0ll
          T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
          by Tr0ll
          Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

          The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

          Original T-con:
          Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

          First replacement T-con:

          I thought it might be t-con and ordered new t-con from china(supposedly tested)...
          10-07-2023, 07:48 PM
        • JJAAMM
          SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
          by JJAAMM
          This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

          Problem
          TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
          07-06-2023, 06:01 AM
        • TR103
          Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
          by TR103
          Hi, I have a Samsung UE50TU with:
          - sound and backlight, but no picture
          - when it arrived, it had a picture for a few seconds
          - it keeps rebooting
          - without ribbon cable between the two panel boards, it does not reboot but I have no picture
          - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
          - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

          - without cable between mainboard and lcd panel and with a jumpered...
          01-22-2025, 04:12 PM
        • BeeShadow
          Sharp lc-70le755u flickering picture/backlight
          by BeeShadow
          Hey everyone! I inherited a "free" Sharp lc-70le755u with a strange picture issue. To try to explain, the picture flickers before what I think is a power saving mode kicks in and reduces the back light. I took a short video and uploaded it here:

          https://imgur.com/NAou7aP

          I'm thinking it could be the TCon board, but possibly the panel. Thought it might be worth it to post here and see if anyone has a better idea before I try throwing parts at it. If its the panel (which I hope its not), then I won't bother trying to fix it.
          07-01-2021, 08:32 PM
        • Mgiffune
          Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
          by Mgiffune
          I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

          I ordered a supposedly ‘new' Tcon board this time, and          ...
          06-09-2024, 10:28 AM
        • Loading...
        • No more items.
        Working...