bad panel or just poor pic quality Samsung UN60ES6100F

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jose6326
    Badcaps Veteran
    • May 2013
    • 707
    • USA
    #1

    bad panel or just poor pic quality Samsung UN60ES6100F

    How is everyone?
    I have been so busy at work I still have 6 tvs waiting for me to fix
    I have really missed this forum

    Anyways I have a 60inch that I bought last year November and the mfg warranty is about to expire
    So I wanted some input if my panel is going bad or its just the pic quality

    When im watching any movie or show and there is a night time scene or just a very dark scene the blacks look pixelated (if thats correct terminology)

    Please see pics
    Attached Files
    Tags: None
    • freakaftr8
      Badcaps Legend
      • Oct 2012
      • 3743
      • USA
      #2
      Re: bad panel or just poor pic quality Samsung UN60ES6100F

      Signal processing issue on the mainboard. panel seems okay
      Did I leave the soldering iron on?

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK
          #3
          Re: bad panel or just poor pic quality Samsung UN60ES6100F

          Could just be crappy MPEG compression. Try with gradient pattern maybe available in service menu. Also try pure HDMI with bluray or other near lossless source.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • jose6326
              Badcaps Veteran
              • May 2013
              • 707
              • USA
              #4
              Re: bad panel or just poor pic quality Samsung UN60ES6100F

              i forgot to mention this happens when im using a wifi signal to watch netflix. not sure if that matters. but when i watch 1080p tv shows it still does it. also i dont have a blu ray player but i do use an hdmi cable for the dvd player.

              i will check the service menu if i can find it



              thanks

                Comment

                • jose6326
                  Badcaps Veteran
                  • May 2013
                  • 707
                  • USA
                  #5
                  Re: bad panel or just poor pic quality Samsung UN60ES6100F

                  Should i just call samsung for a warranty claim?

                    Comment

                    • tom66
                      EVs Rule
                      • Apr 2011
                      • 32560
                      • UK
                      #6
                      Re: bad panel or just poor pic quality Samsung UN60ES6100F

                      Yeah it's under 12 month old.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • howardc64
                          Samsung QN75Q6FNA backlight no display, red LED blink 2x, fault in panel
                          by howardc64
                          • Prior owner tried a replacement main board. No difference.
                          • Samsung 2x red blinking standby LED = panel fault
                          • Jumpered FB_TRDY_1 (pin 1 CN1300 left. main tcon->left side buffer boards) and FB_TRDY_3 (pin 95 CN1301 right. main tcon->right side buffer boards) This allows testing individual T-Con (on main board) connection to panel on this Samsung. Found fault on left side (viewing from rear of TV)
                          • Each side has 2 buffer boards, disconnected left side flex between 2 buffer boards. Fault is on the left most board.
                          • Tape masking eventually isolated to CN1300 pin 15 (CKV4_GOA) Display
                          ...
                          07-19-2025, 10:54 PM
                        • Biruslapio
                          Samsung's AU series "high quality" panel internally melting
                          by Biruslapio
                          I got this 55 inch AU7X00 TV, it was rebooting and showed no image only a blink of the backlights.

                          I assumed it was either panel or motherboard. Turns out it was the panel, and after applying some tape on the ribbon cable that goes to the left side of the screen, the TV turned on with image, then I suddenly noticed a dark spot and the pixels were turning black on the left edge, I was sad and thought I smashed the screen somewhere, found nothing visually, it looked in perfect condition and if it was there before it would've been noticeable while I was inspecting the TV the first time....
                          07-12-2024, 10:08 AM
                        • Document Archive
                          Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                          by Document Archive
                          This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                          09-07-2024, 05:50 AM
                        • triplefour
                          SAMSUNG UN50TU8000F rebooting, backlight ok. No 12v to panel boards.
                          by triplefour
                          TV flashes backlight then reboots over and over. no image. Client said it used to have image for a bit before rebooting. Got worse over time.

                          tcon is built into mainboard.
                          Only one cable goes to panel boards.
                          there is a cable from one panel board to the other that links them.
                          cost cutting measure that results in us having harder time to diagnose.
                          removing the link to the second panel board allows TV to stay on with stable backlight but no image.
                          used cut off tape method to mask 1 maybe 2 pins on the side of the cable that goes to that second panel board....
                          07-28-2022, 07:59 PM
                        • NWArkGuy
                          Samsung UN65TU8000 - Panel Issue [ hole in ribbon cable ]
                          by NWArkGuy
                          Well, I will be the first to admit that I screwed up...

                          In attempting to replace the backlight in a UN65TU8000, I made a hole through one of the ribbon cables between the board that runs along the bottom of the back of the TV and the panel. This lead to a between a 1/4 to 1/2 inch vertical stripe running the full height of the image.

                          I don't have the experience; personally, to solder a bridging wire for the paths that were cut. So, I have been on the hunt for other Samsung TV's of similar size.

                          I have 2 that I have found and have in my possession. ...
                          10-12-2023, 10:13 PM
                        • Loading...
                        • No more items.
                        Working...